Fender Mustang Floor Amplifier Firmware 1.3
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: MustangFloor_1.3.upd.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
Enhancements/Fixes for the Fender Mustang Firmware version 1.3 include the following items:
– Moved EXP-1 expression pedal Volume mode control to adjust volume level after the Amp section but before the Post-Amp Effects section.
– Revised how EXP-1 expression pedal calibration is performed. The new procedure will provide users with added flexibility to customize the range of their pedal (i.e. they can remove some heel range to get more toe sensitivity, etc.).
The EXP-1 expression pedal calibration procedure is as follows:
1. Press and hold UTIL while powering on, UTIL LED should light up for 1 second.
2. Move the expression pedal between the desired heel and toe endpoints to set the range.
3. Turn the encoder knob to the next Preset to complete the process.
Note: If an external EXP-1 pedal is connected at the time of calibration, both pedals will need to be calibrated at that time. A Factory Restore also initiates the expression pedal calibration process.
Your Fender Mustang Floor unit’s firmware can be updated by the user with the Fender FUSE software and your unit connected. To do this, please follow the steps below.
1. Go to the Main Menu (top left hand side in the Fender FUSE user interface), and select Utilities and Update firmware.
2. Turn off the power on your Fender Mustang Floor. While holding the Data Wheel, turn the power back on. A dialog window will open. Here you will choose either the bundled firmware update file or you can browse for the firmware file you would like to update to. (The current Mustang firmware version can be downloaded under Related Downloads below)
3. Once you have selected the correct firmware file, select it, and Fender FUSE will automatically begin the firmware update process.
4. Once the firmware update is complete, turn your Fender Mustang Floor off and back on. At this point, the update process is complete.
Note that a Factory Restore will require that the built-in pedal and the Explession pedal (EXP-1) if used will need to be recalibrated. Please see the instructions below to recalibrate your EXP-1 pedal. If an external EXP-1 pedal is connected at the time of calibration, both pedals will need to be calibrated at that time.
Download