EVGA Z87 Stinger BIOS 1.05
Tipo di file: BIOS.
Sistema Operativo: AnyOS.
Nome del file: E872_105.zip.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
Correzioni :
– Fix “load previous values” function
– Fix memory TWR value setting
– Improve PCI-E compatibility
– Fix system cannot boot when setting manual CPU core
Windows Installation:
– Download the .zip file for your motherboard
– First go into your BIOS and load defaults, save and exit
– Close all open programs.
– Go into the folder where you unzipped this package and run the appropriate batch file with full administrator rights.
– For Windows XP, Vista or 7 32Bit: FPTWIN32.BAT
– For Windows XP, Vista or 7 64Bit: FPTWIN64.BAT
– Press Y in CAPITAL LETTERS to start the flash process
– DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
– After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup.
NOTA:
– If flash box immediately closes after flash attempt, the flash may need to be ran from a CMD prompt with administrator privileges or DOS version.
USB Flash/DOS Drive Installation:
– Create a bootable disk.
– Extract the above .zip file to your bootable disk.
– From a DOS prompt, run fptdos.bat
– Press Y in CAPITAL LETTERS to start the flash process
– DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
– After the flashing is finished, shut the system down completely. Then power on again.
Important:
– After flashing verify that the correct flash was applied by checking the version number on the lower right corner of the BIOS screen.
Download