Cisco RV325 Router Firmware 1.1.0.09
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: RV32X_FW_v1.1.0.09.bin.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
I cambiamenti:
– When a user configures IP/MAC binding rule, the DHCP client PC can not get a DNS address. (CSCuf30458)
– When the AH Hash Algorithm is enabled, G2G VPN behaves abnormally. (CSCuf29893)
– After a VPN tunnel is broken, the GUI still reports it as being connected. (CSCuf29807)
– Firewall rules configured by using the wizard do not work (CSCuf29786)
– Interface hangs if more than 10 port forwarding rules are created (CSCue37361)
– The Domain Name value in Setup>Network should not be mandatory. (CSCue32361)
– Bonjour does not work normally after upgrading from firmware version 1.0.1.17 to version 1.0.2.03. (CSCue20228)
– When the device is behind NAT and acts as VPN server, the data traffic cannot pass through the VPN tunnel. (CSCue12909)
– Differentiated Services Code Point (DSCP) is not being marked in the packets. (CSCud84933)
– When a 3G or 4G USB dongle is connected by using a USB port, a dongle attached to the second USB port might not function reliably. (CSCud51978)
– Multicast streams cannot pass through the device when it working in Transparent WAN Bridge mode. (CSCud49653)
– After reload, 802.1x does not work (CSCud47422)
– The device management option is not correctly managing the HTTP or HTTPS data sent to the device; the device should block only ICMP. (CSCud45072)
– When the DHCP lease time is changed, the lease time value shown on the DHCP Status page is not updated. (CSCud37623)
Procedura d’installazione:
– Salva il pacchetto scaricabile.
– Accedere all’interfaccia utente Web del router.
– Passare alla sezione di aggiornamento del firmware dell’unità wireless.
– Seleziona il firmware attuale e configura il tuo router per installare questo file.
– Attendere mentre il dispositivo esegue questo processo.
– Riavviare l’unità, se necessario.
Download