Casio EX-TR70 Camera Firmware 2.00
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: EX-TR70.bin.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
Correzioni:
– Improved Make-up Mode and dark location shooting performance.
Checking your firmware version:
– Turn on your EX-TR70 camera, and perform the operation below: MENU -> Setup -> Version.
– If “Version 1.00” appears, you need to download this update software and install it on your camera.
– If “Version 1.01” appears, it means that your camera already is running the latest firmware version, so you do not need to install this update.
Requirements:
– To install this firmware update on your camera, you must copy it into the root directory (the top directory on the drive) of a memory card. Because of this, you need to have the USB cable (that comes bundled with the camera) on hand or a card slot available on your computer.
Passaggi di installazione:
1. Extract the file you downloaded.
2. Load the memory card into the camera. Connect the camera to its USB cable and establish a USB connection with your computer.
3. Copy the extracted file (EX-TR70.BIN) to the root directory (the top directory on the drive) on a memory card.
4. Remove the USB cable from the camera, and turn off the camera.
5. Accendi la videocamera.
6. On the camera’s monitor screen, touch [MENU]. If [MENU] is not displayed on the camera’s monitor screen, touch the tab to display it.
7. On the monitor screen, drag upwards until “Setup” is displayed. Next, touch “Setup”.
8. On the monitor screen, drag upwards until “Version” is displayed. Touch “Version”.
9. On the Version screen, touch [Yes].
– When using battery power during installation, a safety feature will activate and installation will be impossible if battery power is low. The PROGRAM UPDATE screen will not appear in the above procedure, and a “LOW BATTERY message will appear instead. Make sure the camera’s battery is fully charged.
– Only the current firmware version will appear on the display if this update software is not on the memory card loaded in the camera.
10. This starts installation of the update firmware, which is indicated by the message “NOW LOADING” on the camera monitor screen. The message “COMPLETE” appears when installation is complete.
11. After installation is complete, turn off the camera.
12. Check if the firmware version has been updated.
Avviso IMPORTANTE:
– Note that installation of the update software cannot be undone. Once you install the update software, there is no way to restore your camera to its original firmware version.
– If firmware update installation is interrupted due to low battery power, your camera will no longer be able to operate. Make sure the camera’s battery is fully charged before starting the firmware update installation procedure.
– When using battery power for installation, a safety feature makes it impossible to perform installation when battery power is low. Make sure the camera’s battery is fully charged when using battery power for installation.
– After copying the EX-TR300.BIN software to memory card, disconnect the USB cable from the camera before installing the firmware onto the camera. This firmware update cannot be installed while the USB cable is plugged into the camera.
Download