Broadsoft Snom320 IP Phone Firmware 7.1.33
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: snom320-7.1.33-SIP-f.bin.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
Features:
– support blind transfer using buttons (using the Buttons programmable key type, single step blind transfer is possible now by just hitting transfer and the appropriate button with action type invite)
– dual audio and handsfree support on conference (snom370) (+Spkr to add a secondary audio device during conference is available now)
– use status LED for conference and transfer operation (snom370) (the big LED on top of display shows activity in the said states now)
– PUBLISH based directory search now supports list of matches (consistent with LDAP directory search results, PUBLISH returned lists are also shown)
– support DND control through buttons (a DND operation through Buttons programmable key type turns indication on/off on display)
– call acceptance is dependent on speaker receive call (this new configuration parameter controls if pressing the speaker key can accept a ringing call or not)
– new configuration parameter global missed counter to track missed calls (this new configuration parameter is to allow backward compatibility to old behavior when missed calls on all SIP lines were counted together)
– enabled directory search during a call (to help make a second call e.g. for transfer even during a call)
– Call Pickup through buttons linked to calls state (snom360/snom370) (in the Calls window, pickup is now possible as in dialog state through information gathered from Buttons programmable key type feature)
– remove ringing calls from list of possible transferees (to make transfer operation more user friendly and avoid unintended transfers by mistake)
– use soft transfer key only for deflection of ringing call (to have a consistent transfer mechanism, soft key appears only for deflection now)
– showing display name in call monitoring state controlled by configuration parameter show name dialog (snom360/snom370) (in call monitoring state it is useful to show names if possible instead of numbers of the calls in progress. The new configuration parameter controls this feature. The naming format is the same as set by display method configuration parameter)
– added new configuration parameter naptr sip uri to convert SIP URI’s of the active line using RE Dial Plan for call lists (it’s meant to rewrite incoming SIP URI’s to be properly formatted for potentially following outgoing calls using that URI from the call lists. Default value is off.)
– programmable key Active/Line combination receives a ringing call only on original key (to allow making a new call on another programmable key even if there is an incoming call on the first line)
– option for backlight to completely turn off, blink or dim (snom370) (some users want to turn off the backlight completely after a call is done. All combinations are now possible on snom370)
– display of audio icons solely dependent on configuration parameter audio device indicator
– new configuration parameter auto reboot on setting change to enable new auto reboot feature but preserve old behaviour if needed; IMPORTANT: this configuration parameter takes effect on the configuration parameters following it in the setting file only, so if you like to have it effect all configuration parameters in the configuration parameter file, put it at the top of the file! If you experience a constanly rebooting phone set the log level to 7 and see (via syslog server) which configuration parameter causes the loop. (the auto reboot functionality has been included initially into 7.1.33 RC2)
– show HTTP/Admin password warning on display (snom360/snom370)
– context- sensitive function keys for Mute/Unmute are not hidden when configuration parameter redundant fkeys is off
– LDAP/Directory Search list dials selected contact on handset offhook
– F_LOGON_USER can be used on all phones for Hot Desking (log on/log off user accounts)
– F_LOGOFF_ALL prompts log on wizard if logon wizard configuration parameter is on
– Disabled 5 sec. lock on Shared Line key for Broadsoft/MetaSwitch as this is handled by line seize throttling mechanism
– added protection against brute force attack to find out the HTTP password (more than three unsuccessful login attempts will block the Web User Interface (WUI) for 1 minute; further groups of three unsuccessful logins will double the blocking time respectively)
– show warning message if Web User Interface (WUI) isn’t secured by admin- and HTTP user password (show a warning hint at the upper right hand corner)
– html encode Web User Interface (WUI) pages to prevent XSS attacks (this prevents injected (java-)script code to be executed)
– new configuration parameter use hidden tags to protect the phone against XSRF attacks (because with each new Web User Interface (WUI) page a new hidden security tag is provided only the authenticated user is able to use the Web User Interface (WUI). Faked HTTP POST requests will not work anymore. With use hidden tags enabled you can do a distinct subset of GET requests with parameters only which are needed for the normal usage of the Web User Interface (WUI) (no direct dialing, no remote control is available if enabled. The mentioned functionality only works if the Web User Interface (WUI) is secured via non default admin- and HTTP passwords!)
– added button to logout an already authenticated session (a missing opportunity has been added to logoff an authenticated user from the Web User Interface (WUI) page; this button will be displayed in the upper right hand corner only if the Web User Interface (WUI) is secured via non default admin- and HTTP passwords!)
– added initial security advice Web User Interface (WUI) page (a new security advice Web User Interface (WUI) page has been added which will be shown once initially on restart)
– new warning message and security advice page can be switched off via new configuration parameter ignore security warning (this has been added for backward compatibility reasons)
– identity based configuration parameter user expiry can be adjusted in seconds now (via Web User Interface (WUI) you can change the value to your needs without using the previous dropdown presets anymore)
– added new function key type BLF which is a mix of the Extension and Speed Dial. (The LED is controlled by the dialog state like in the Extension mode, while the key is controlled by the Speed Dial nature. In other words, no matter what the LED is doing, pushing that button will always dial the speed dial number. If you set it to something like *7123, then this button will always pick up the call for 123.) See this description for further details on BLF
– removed audio device indicator configuration parameter from Advanced Behaviour page, it is available at page Advanced Audio anyway
– using new encoding format in XML configuration parameter files, denoted by an additional attribute in the tree name (e=”2″) (from now on a proper HTML encoding is used; downgrading to older versions will make special chars appear wrongly!)
– show secret configuration parameter values only as asterisks in log
– show url loading update for redial list (if the list is taking longer than usual, some display update for loading activity shows the phone is processing the list)
– added pn flag for input, to switch directly to the numeric input mode
– fixed soft key update problem
– rework of SnomIPPhoneText, better line breaking and <br /> tag support (it is recommended to use <br /> now instead of <br>, because the softkeys are not working with <br>)
– added new {index
Download