Basler BIP2-1920-30c IP Camera Firmware 3.14.7
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: Firmware Package 3.14.7.zip.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
Questo pacchetto fornisce i file di installazione necessari della versione Basler BIP2-1920-30c IP Camera del firmware 3.14.7.
Corrections:
– Camera stops streaming after frequent AOI changes. If the sensor AOI or the stream AOI scaling factors were changed frequently (about 30,000 times), the camera sometimes stopped responding.
– Live recording fails if FTP server address is invalid If the IP address parameter of the target FTP server for live recording contained illegal characters, e. g. a leading “ftp://”, the live recording
daemon used to crash after recording had been turned on. This also resulted in other live recording API parameters not being available anymore.
– Changing the port of the FTP server for live recording has no effect. Even if the port of the target FTP server for live recording was changed, the FTP connection still used the standard FTP port 21 instead of the new setting.
Modifications:
– Getting the last available single image from the live or alarm buffer. When clicking the Snapshot button in the web app or entering the URL http://<IP_Addr>/cgi-bin/mjpeg?mode=single, the next complete single image of the stream was delivered. This was not the expected behavior when using real-time triggered streams. Now, this function delivers the last available image in the live or alarm buffer. This better meets the requirement to get the most current image for all streaming types.
Passaggi di installazione:
1. Make sure that the camera whose firmware you want to update is connected.
2. Click the Start Firmware Update button. A Start Firmware Upload dialog box will open asking if you want to continue.
3. Click the OK button. A web page will open asking you to upload the firmware file.
4. Use the Browse button to select the new firmware file that you want to load onto the camera.
a. If you are updating firmware versions 3.8 or higher, select the firmware update file.
b. If you are updating firmware versions 3.7 or before, select the FW-FirmwareUpdateHelper_x.x.bin file.
5. Click the Start Firmware Upload button. A web page will open asking you to verify that the firmware is correct for the camera.
6. Make sure that the firmware is correct and then click the Confirm Update button. A web page indicating the progress will appear. Wait for the update to finish. After about 45 seconds a web page will appear indicating that the update is finished.
7. Click the Return to Web Client button to return to the Basler Web Surveillance Client. If you have updated a firmware version 3.7 or before using the FW-FirmwareUpdateHelper_x.x.bin file, you now need to repeat this procedure starting from step 1 to perform the actual firmware update. This time you have to select the FW-x.x.x.bin firmware update file in step 4.
Download