AXIS 205 Network Camera Firmware 4.04
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: 205_404.bin.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
Features:
– Features:
– Small, compact size
– Motion JPEG image quality
– Built-in Web server
– Three different resolutions, up to 640×480
– Up to 30 frames/second in all resolution modes
– Supports up to 20 users simultaneously
– Easy setup using the new one-click installation method or the Windows-based AXIS IP Utility software
– Password-protection option to restrict viewing
Manual Installation with ARP/Ping
The device can alternatively be installed using the ARP and Ping commands.
1. Acquire an unused IP address for the camera. This IP address must be on the same subnet as your computer.
2. Locate the serial number (S/N) on the camera’s rear label.
3. From a computer on your network, open a Command Prompt (in Windows: from the Start menu, select Run… and type cmd in the field. Click OK).
4. As appropriate for your operating system, enter the following
commands:
Windows syntax: Windows example:
arp -s <IP Address> <Serial Number>
ping -l 408 -t <IP Address>
UNIX/Linux/Mac syntax: UNIX/Linux/Mac example:
arp -s <IP Address> <Serial Number> temp
ping -s 408 <IP Address>
5. Check that the network cable is connected. Start/restart the camera by disconnecting and reconnecting the power cable.
6. Close the Command prompt when you see ‘Reply from 192.168.0.125: …’
7. The IP address has been set when the Power indicator is permanently lit and the Network indicator flashes intermittently.
8. Start your browser, enter the IP address of the camera in the Location/Address field and press Enter on your keyboard.
Caution!
The firmware upgrade may take up to ten minutes to finish and must not be interrupted.
About Network Camera Firmware:
L’aggiornamento a una versione del firmware più recente rispetto a quella già installata sulla tua videocamera di rete può migliorare le prestazioni e la stabilità complessive del dispositivo, risolvere vari problemi e aggiungere supporto per funzionalità di nuova concezione o migliorare quelle esistenti.
On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty, or the device’s performance dropped after an upgrade. Tuttavia, tieni presente che applicare una build precedente potrebbe non essere sempre possibile.
La modifica del firmware della fotocamera deve essere eseguita quando la nuova versione risolve un problema riscontrato dal dispositivo o aggiunge una nuova funzionalità (o ne migliora una esistente) che potrebbe rivelarsi utile.
Per quanto riguarda il metodo di installazione, i passaggi variano a seconda del modello che possiedi, ma in pratica devi connettere la videocamera tramite un cavo Ethernet (nome utente e password richiesti) e utilizzare il file scaricabile nella sezione Aggiornamento firmware per aggiornare il tuo dispositivo. Assicurati di non interrompere la procedura di installazione.
Tuttavia, assicurati di leggere attentamente e comprendere i passaggi dell’installazione in modo da non finire con un dispositivo rotto. Questo processo non è destinato a essere distruttivo, ma comunque, è meglio salvare tutte le configurazioni prima di applicare un firmware diverso.
Detto questo, se consideri che questo firmware migliori in qualche modo il tuo dispositivo, premi il pulsante di download e ottieni la versione desiderata; in caso contrario, controlla il nostro sito Web il più spesso possibile in modo da non perdere l’aggiornamento che aumenterà le prestazioni della videocamera.
Download