Atomos Shogun 7 Recorder Firmware 10.43
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: ATOMSG7_10.43.zip.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
New features:
– RAW Recording: 4k DCI (17:9). Resolution: 4096 x2160, Imager Scan Mode: FF, Frame rates: 59.94, 50, 29.97, 25, 24, 23.98, S&Q frame rates: 1-60
– RAW Recording: 4k UHD (16:9). Resolution: 3840×2160, Imager Scan Mode: FF, Frame rates:: 59.94, 50, 29.97, 25, 24, 23.98, S&Q frame rates: 1-60
ProRes and DNx Recording:
– Recording video output of the camera HDMI 2.0 and SDI 12G, 6G, and 3G. 4kDCI (4096×2160) at 59.94, 50, 29.97, 25, 24, 23.98 | 4kUHD (3840×2160) at 59.94, 50, 29.97, 25, 23.98 | HD (1920×1080) 59.94, 50, 24, 23.98 | HD interlaced (1920×1080) at 50i, 59.94i
– NOTE: 4k Video modes are not available when using Imager Scan mode S35.
AtomOS Monitoring Settings:
– Native – Linear to Slog3 or use with 3D LUTs – can use any existing Slog3 LOOK LUTs.
– Rec709 – to view RAW input in SDR up to 6.7 stops of dynamic range.
– HLG – to view RAW in HLG with up 10.5 stops of dynamic range.
– PQ – to view RAW in PQ/HDR10 with up to 10.5 stops of dynamic range, for scenes with extended spectral highlights.
Note importanti:
– With the installation of this new update ALL users will be required to activate ProRes RAW, as a codec (as they would have done for DNx activation).
– Following the Firmware update, if in ProRes RAW mode the Shogun 7 will default back to ProRes HQ. When a RAW source is plugged in, or a user selects ProRes Raw Codec, a UI popup will ask for activation code to continue.
– Even if the user has already been shooting with ProRes RAW, they must activate it in this update by visiting Atomos website atomos.com/activation and follow the online instructions to generate a code.
Firmware Update Tutorial:
– Download and unzip the file.
– Copy the file onto a recommended, formatted driver, using the docking station included with your recorder.
– Insert the drive into the Atomos recorder while it’s off.
– Power up the Atomos recorder.
– The screen will show flashing lines of color. This is normal – DO NOT power off!
– Updating will take a few minutes.
– Once completed, the Atomos recorder will power down.
– Power up the Atomos recorder again.
– Check Menu > Product Info > AtomOS Version. This should match the version you have just downloaded.
– Enjoy your updated Atomos recorder !
Firmware Recovery Tutorial:
– Power down the Atomos recorder (Hold power button for 4 seconds).
– Hold down the power button for 10 seconds approximately.
– You will see the “Firmware Update Failed” screen.
– Insert your HDD / SSD.
– The install process will begin and the screen will show flashing lines of color. This is normal – DO NOT power off !
– Once completed, the Atomos recorder will power down.
– Enjoy your updated Atomos recorder !
Download