XiaoYi Yi Smart Dash Camera Firmware FWCARC10
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: FWCARC10.bin.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
Update Instructions (f YI Smart Dash Camera cannot boot normally, try push the reset button on the top of the camera with a pin. If the camera still cannot boot):
– Download FWCARC10.bin to the micro SD card and put it in the root directory (make sure the file name remains FWCARC10.bin)
– Insert the micro SD card in the camera
– Connect the camera to a power source, then switch on the camera
– The yellow light at the right-bottom corner of the camera will flash, but the screen remains dark (if the light is not flashing, push the reset button on the top of the camera with a pin)
– Wait for 1-5 minutes before the update is successful and the camera is restarted
– Format the micro SD card after the camera is successfully restarted, otherwise the update process will be started every time the camera is restarted
Notice:
NEVER cut off the power source or shut down the camera while update is in progress.
Device Requirement:
– One Class10 80 MB/s reading speed micro SD card, 8-32 GB
– One Windows PC
– USB power source, can be USB charging port or portable USB battery kit, 1A Output
Télécharger