Ubiquiti UAP-LR Access Point Firmware 4.3.20.11298
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: BZ.qca9342.v4.3.20.11298.200704.0747.bin.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
Améliorations:
– [UAP-MTK] Improve upgrade reliability.
– [UAP-MTK] Send roam events instead of disconnect events when clients roam.
– [UAP-G2] Improve Wireless Uplink stability on downlink.
– [UAP-G2] Increase authenticator log level, if debug logging is enabled.
– [UAP] Improve isolated AP logging.
– [USW] Improved server option checking of DHCP snooping.
– [USW] Align the Port ID info in LLDP.
Bug Corrections:
– [UAP-MTK] Fix inability for WiFi to operate when proxy ARP is enabled (proxy ARP is only supported in beta firmware).
– [UAP-MTK] Fix issue when country is set to Faroe Islands.
– [UAP-G2/G3] Fix some issues with wireless uplink connectivity.
– [UAP-G3] Fix intermittent inability to connect with Gen3 UAP as downlink.
– [UAP] Fix intermittent multicast packet loss on static VLANs.
– [UAP] Fix memory leak in netconsole when operating as wireless downlink.
– [UAP] Fix Gen1 PS4 connectivity issue when high performance devices is enabled.
– [USW-POE] Fix PoE initialization issue.
– [USW-POE] Fix lcm upgrading.
– [USW] Fix DHCP flooding between isolated ports.
– [USW] Fix DHCP packet inter-VLAN route loop by DHCP snooping.
Instructions:
– All URLs use HTTPS. This assumes your device(s) are running 3.7.56 or later and that the device’s date is properly set. Please change URLs to HTTP for device(s) running earlier firmware or if the date is incorrect (e.g. if device can’t reach a NTP server).
– You may start to see EVT_AP_RestartProc events in the controller log. If you see these, please report if there is anything specifically in your setup that triggers the events. The processes restarting is not new, but the reporting of the restarting is, and we are using these reports to clean up these issues.
– US-XG-6POE upgrading from 4.0.2 or earlier will take a long time to upgrade. Don’t be surprised if your switch is unavailable for 5-10+ minutes as 4.0.3+ also updates the PoE firmware to improve PD compatibility.
– UIS-8-450W upgrading from 4.0.33 and earlier will have their PoE firmware upgraded automatically to improve PD compatibility. That process will take a few minutes. PoE will be unavailable during the upgrade process.
– USW-16/24-PoE running 4.0.44 cannot directly upgrade to firmware 4.0.60 or later. Please upgrade to THIS release first via custom upgrade and then you’ll be able to upgrade it to firmware 4.0.60+.
Télécharger