Thecus N4510U PRO NAS Server Firmware 2.06.02.3.9544 Beta
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: Thecus_x86_64_FW.2.06.02.3.cdv_build9544_N2800_N4510U_N4800_N5550_N7510.rom.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
New Features/Changes:
– Upgrade Samba to 4.3.9
– Upgrade e2fsprogs to 1.43
– Add BTRFS support samba recycle bin
– DFN-CERT-2016-0591
Upgrade firmware:
– Save the downloadable file on your computer.
– Login as admin from web interface to your Thecus NAS with 64bit firmware.
– In the [System Management] menu, choose the [Firmware upgrade] item and the firmware upgrade.
– Press button and select the firmware you downloaded.
– Press [Apply] and the confirm window will pop up. Please select [Next] button twice to confirm the process, and start firmware upgrade. The entire upgrade takes about 3 minutes. After the firmware is upgraded, Thecus NAS will beep for 3 seconds.
– REMARQUE: If your browser is set to cache the screen, please press CTRL-F5 in your browser to reload from server instead of from browser’s cache.
– During firmware upgrade process, you will see a progress bar indicating the completeness.
– REMARQUE: During firmware upgrade process, it is imperative that user do not turn off the power to Thecus NAS or close the browser. This will lead to catastrophic result.
– Just in case, the upgrade process failed, please DO NOT restart or shutdown the NAS. Go back and upgrade the firmware again.
– After the firmware is upgraded, you will see a message ask admin user to reboot. Please reboot to finish the upgrade process.
– After click [Reboot], the system will redirect to [Shutdown / Reboot] page, you may select the NAS to shutdown or reboot.
– REMARQUE: After reboot the Thecus NAS, please go to [System Management > Config Mgmt] to save your configuration. New version of firmware will not work with configuration file from previous versions of firmware.
Télécharger