Ricoh Pentax K-7 Digital Camera Firmware 1.13
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: k7_v113m.zip.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
Corrections:
– Correspond to HD PENTAX-DA AF REAR CONVERTER 1.4X AW.
– Improved stability for general performance
Installation steps:
1. Provide a formated SD/SDHC memory card for the update software (with at least 32MB of available memory space). The downloaded file is self-extracting. The following file is extracted: fwdc204b.bin
Copy the above Firmware file [fwdc204b.bin] to the root directory in the SD/SDHC card. If your computer does not have a card slot, you can copy the firmware update file by inserting the SD/SDHC card into your camera and then connecting the camera directly to your computer.
2. Insert the D-LI90 battery into the camera and confirm the battery is full by battery level indicator then turn the camera off.
3. Insert the update SD/SDHC card (prepared in step 1) into the camera and close card cover.
4. Turn the camera power on while pressing the MENU button.
5. “NOW LOADING” appears in the LCD monitor, and will change to the “PROGRAM UPDATE”. At the bottom of the LCD monitor, CURRENT VERSION 1.00/1.02/1.03/1.10/1.11/1.12/1.13/1.14/1.15. UPDATE VERSION 1.16 will be displayed.
6. Press the four-way controller to select “YES” and press the “OK” button.
7. “UPDATING” appears on the LCD monitor and updating starts. Please do not under any circumstances switch off the power before the update is completed. It will take approximately 90 seconds to complete update.
8. When update is completed, the “COMPLETE” will be displayed at the left bottom of the LCD monitor, then turn the camera off.
9. Remove the update SD/SDHC card from the camera.
10. To check the Firmware version in your camera, turn the camera on while pressing the MENU button. Check that the version displayed in the LCD monitor is “Ver.1.16”. The camera automatically starts up after about 5 seconds.
Caution:
– When updating is finished, the update SD/SDHC card still contains the Firmware file.
– If you want to use this card to take pictures, delete the Firmware file first.
Télécharger