Mobius ActionCam Firmware 1.13
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: FWTLCAM_20131225_v1.13.zip.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
Manual Firmware Update
DO NOT PRESS ANY BUTTONS during the firmware update process.
There are two methods with which you can update the firmware.
Method 1 without pressing any buttons:
• Eteignez la caméra.
• Connect the camera to the computer and wait until the card is recognized as a Removable Drive.
• Copy the new firmware file into the camera’s flash card root folder. All firmware files are
named FWTLCAM.BIN. The name must not be changed.
• Disconnect the camera from the computer and wait until it turns off.
• Wait until all the LEDs are turned off.
• Connect the camera to the PC. The blue LED will turn on for about 13 seconds and then begin
to flash. WAIT.
• After another 7 seconds the blue LED will turn off. WAIT.
• After a second or two the yellow LED will turn on. WAIT
• The firmware file will be automatically deleted.
• The camera will automatically be connected as a removable device.
• After about 4 seconds the process is complete and the yellow LED will turn off.
• The camera is now ready for use as a USB drive.
Method 2 by pressing the power button :
• Eteignez la caméra.
• Connect the camera to the computer and wait until the card is recognized as a Removable Drive.
• Copy the new firmware file into the camera’s flash card root folder. All firmware files are
named FWTLCAM.BIN. The name must not be changed.
• Disconnect the camera from the computer and wait until it turns off.
• Wait until all the LEDs are turned off.
• Turn on the camera and WAIT.
• The blue LED will turn on for about 13 seconds and then begin to flash. WAIT.
• After another 7 seconds the blue LED will turn off. WAIT.
• After a second or two the yellow LED will turn on indicating the firmware file has been
automatically deleted.
• The camera is now in standby mode and ready for use.
Télécharger