MikroTik RouterOS SMIPS Firmware 6.47 RC 53
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: routeros-smips-6.47beta53.npk.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
Important note!!!
– The Dude server must be updated to monitor v6.46.4 and v6.47beta30+ RouterOS type devices.
– The Dude client must be manually upgraded after upgrading The Dude server.
– Make sure LTE APN Profile name does not match any of the DHCP server’s names if LTE passthrough is used.
– The Dude requires « winbox » policy instead of « dude » to monitor v6.46.4 and v6.47beta30+ RouterOS type devices.
MAJOR CHANGES IN v6.47:
– dns – added client side support for DNS over HTTPS (DoH) (RFC8484);
– socks – added support for SOCKS5 (RFC 1928);
– user – enable « winbox » policy for groups with « dude » policy;
Changements dans cette version:
– socks – added support for SOCKS5 (RFC 1928);
– branding – do not ask to confirm configuration applied from branding package;
– certificate – added « skid » and « akid » values for detailed print;
– certificate – allow dynamic CRL removal;
– console – prevent incorrect type interfaces appearing in command hints;
– crs3xx – fixed QSFP interface linking after removing/inserting QSFP module (introduced in v6.47beta49);
– dhcpv4-server – disallow zero lease-time setting;
– filesystem – fixed NAND memory going into read-only mode or becoming unstable over time;
– ike1 – improved policy lookup with specific protocol;
– ike1 – rekey phase 1 rekeying as responder for Windows initiators;
– ipsec – improved system stability when handling fragmented packets;
– kidcontrol – ignore IPv6 multicast MAC addresses;
– lora – added IPv6 support for LoRa packet forwarder;
– lora – added UTC timestamp for RX events in « rxpk » json;
– lte – added support for Huawei K5161 modem;
– lte – fixed IP type selection from APN on RBSXTLTE3-7;
– snmp – fixed multiple LTE interface OID reporting;
– system – improved kernel panic reporting in logs after reboot;
– wireless – added « russia 6ghz » regulatory domain information;
– wireless – added « skip-dfs-channels » parameter;
– wireless – updated « bangladesh » regulatory domain information;
– wireless – updated « russia4 » regulatory domain information;
Other changes since v6.46.4:
– bonding – improved slave interface MAC address handling;
– bonding – prefer primary slave MAC address for bonding interface;
– branding – fixed identity setting from branding package;
– branding – properly use HTML files for Hotspot (introduced in v6.47beta);
– bridge – added logging message when a host MAC address is learned on a different bridge port;
– bridge – added warning message when port is dynamically added to entry with VLAN range (CLI only);
– bridge – correctly remove disabled MSTI;
– bridge – improved hardware offloading enabling/disabling;
– capsman – fixed « certificate » parameter updating on CAP;
– certificate – disabled CRL usage by default;
– certificate – do not use SSL for first CRL update;
– chr – added support for file system quiescing;
– crs3xx – correctly remove switch rules on CRS317-1G-16S+ and CRS309-1G-8S+ devices;
– crs3xx – do not change bridge host ID’s when updating host table (introduced in v6.47beta32);
– crs3xx – fixed « ingress-rate » property on CRS309-1G-8S+, CRS312-4C+8XG, CRS326-24S+2Q+ devices;
– crs3xx – fixed QSFP+ interface linking for CRS326-24S+2Q+ device (introduced in v6.47beta19);
– crs3xx – fixed interface statistics for CRS354-48G-4S+2Q+ and CRS354-48P-4S+2Q+ devices;
– crs3xx – fixed traffic forwarding after disabling/enabling bridge hardware offloading for CRS354-48G-4S+2Q+ and CRS354-48P-4S+2Q+ devices;
– crs3xx – improved SFP+ DAC cable initialization for CRS326-24S+2Q+ device;
– crs3xx – improved switch host table updating;
– defconf – fixed « no-defaults=yes » applying default configuration (introduced in v6.47beta);
– defconf – fixed default configuration initialization if power loss occurred during the process;
– dhcpv4 – added end option (255) validation for both server and client;
– dhcpv4-client – improved stability when changing client while still receiving advertisements;
– dhcpv6-client – improved error logging when when renewed address differs;
– dhcpv6-server – fixed MAC address retrieving from DUID when timestamp is present;
– discovery – do not send CDP and LLDP packets on interfaces that does not have MAC address;
– discovery – do not send discovery packets on inactive bonding slave interfaces;
– discovery – do not send discovery packets on interfaces that are blocked by STP;
– disk – improved recently created file survival after reboots;
– dns – added support for exclusive dynamic DNS server usage from IPsec;
– dot1x – added « radius-mac-format » parameter (CLI only);
– dot1x – added hex value support for RADIUS switch rules;
– dot1x – added range « dst-port » support for RADIUS switch rules;
– dot1x – added support for lower case « mac-auth » RADIUS formats;
– dot1x – fixed « reject-vlan-id » value range;
– dot1x – fixed dynamically created switch rule removal when client disconnects;
– dot1x – fixed port blocking when interface changes state from disabled to enabled;
– dot1x – improved debug logging output to « dot1x » topic;
– dot1x – improved value validation for dynamically created switch rules;
– dude – fixed connection to other RouterOS type devices through The Dude agents (introduced in v6.46.4);
– fetch – fixed « User-Agent » usage if provided by « http-header-field »;
– filesystem – fixed NAND memory going into read-only mode or becoming unstable over time;
– health – added « gauges » submenu with SNMP OID reporting;
– hotspot – updated splash page design (‘/ip hotspot reset-html’ required);
– ike1 – added error message when specifying « my-id » for XAuth Identity;
– ike1 – added support for « UNITY_DEF_DOMAIN » and « UNITY_SPLITDNS_NAME » payload attributes;
– ike1 – improved stability when performing policy lookup on non-existant peer;
– ike2 – added support for « INTERNAL_DNS_DOMAIN » payload attribute;
– ipsec – added « split-dns » parameter support for mode configuration (CLI only);
– ipsec – added « use-responder-dns » parameter support (CLI only);
– ipsec – control CRL validation with global « use-crl » setting;
– ipsec – do full certificate validation for identities with explicit certificate;
– ipsec – fixed minor spelling mistake in logs;
– ipsec – improved IPsec service stability when receiving bogus packets;
– lcd – fixed LCD service becoming unavailable on devices without LCD screen;
– led – added « dark-mode » functionality for CRS105-5S-FB;
– led – fixed minor typo in LED warning message;
– lora – added IPv6 support for LoRa packet forwarder;
– lora – added value limits for « freq-off » parameter;
– lora – properly update source address for packets when routing table is changed;
– lte – added support for NEOWAY N720;
– lte – added support for multiple passthrough APN configuration;
– lte – do not allow running « scan » on R11e-4G;
– lte – fixed « allow-roaming » setting when using LTE network mode on R11e-LTE;
– lte – fixed « band » value setting when configuration is reset on R11e-4G;
– lte – fixed multiple APN reactivation after deactivation by operator;
– lte – made « mac-address » parameter read-only;
– lte – show « phy-cellid » value only in LTE mode;
– netinstall – removed « Flashfig » from Netinstall;
– netinstall – removed « Make Floppy » from Netinstall;
– netinstall – signed netinstall.exe with Digital Signature;
– ppp – added support for ZTE MF90;
– ppp – fixed minor typo when running « info » command;
– proxy – increased minimal free RAM that can not be used for proxy services;
– quickset – do not show « SINR » field in Quick Set when there is no data;
– quickset – removed « EARFCN » field from Quick Set;
– quickset – removed « LTE band » setting from Quick Set;
– quickset – show « Antenna Gain » setting on devices without built-in antennas;
– quickset – use « station-wds » mode when connecting to AP with RouterOS flag;
– route – improved system stability after reboot with large amount of VLAN interfaces with PPPoE servers attached;
– routing – improved IGMP-Proxy service stability when receiving bogus packets;
– sniffer – allow setting port for « streaming-server »;
– sniffer – fixed minor typo in « host » menu;
– snmp – added « dot1qTpFdbTable » OID reporting for Q-BRIDGE-MIB;
– snmp – changed « upsEstimatedMinutesRemaining » reported value from seconds to minutes;
– snmp – fixed « dot1dBasePort » index offset for BRIDGE-MIB;
– snmp – improved OID policy checking and error reporting on « set » command;
– snmp – improved stability when polling MAC address related OID;
– ssh – fixed SHA256 user authentication algorithm checking (introduced in v6.46.4);
– supout – added « dot1x » section to supout files;
– supout – added « gps » section to supout files;
– supout – improved PoE-out information reporting;
– supout – improved UPS information reporting;
– switch – made « auto » the default value for « vlan-id » parameter when creating a new static host entry;
– system – correctly handle Generic Receive Offloading (GRO) for MPLS traffic;
– system – improved driver loading speed on startup;
– system – improved system stability when forwarding traffic from switch chip to CPU (introduced in v6.43);
– tr069-client – removed warning log message when not using HTTPS;
– traceroute – improved stability when invalid packet is received;
– traffic-flow – added « postDestinationMacAddress » parameter support for IPFIX and Netflow v9;
– traffic-generator – improved statistics reporting;
– upgrade – fixed space handling in package file names;
– ups – improved compatibility with APC Smart UPS 1000 and 1500;
– w60g – fixed link status logging;
– w60g – improved rate selection in low traffic conditions;
– w60g – improved stability after multiple disconnections;
– w60g – use « arp » and « mtu » parameters from master interface when creating a new station;
– webfig – updated icon design;
– winbox – added « Options » parameter support for DHCPv6 client and server;
– winbox – added « Rate » parameter for switch ACL rules;
– winbox – added « auto-erase » option to « Tool/SMS » menu;
– winbox – added 160Mhz extension channel support for CAPsMAN;
– winbox – added comment support for « Switch->VLAN » menu;
– winbox – added support for « Tools->WoL » menu;
– winbox – added support for inline bar graphs for LTE signal values;
– winbox – aligned all « IP->Traffic Flow->IPFIX » check boxes in single line (WinBox v3.22 required);
– winbox – allow setting « 20/40/80/160Mhz-eeeeeeCe » channel under « Channel Width » parameter;
– winbox – allow setting « Primary » parameter for « balance-tlb » bonding interfaces;
– winbox – do not show « Revision » parameter under « System/RouterBOARD » menu on devices that have only one revision;
– winbox – fixed « ARP » parameter inheritance from « CAPs Configuration » configuration;
– winbox – fixed « BGP Origin » value display under « IPv6->Routes » menu;
– winbox – fixed « Bands » parameter display for LTE interfaces;
– winbox – fixed « DSCP » parameter value setting;
– winbox – fixed « Data Rate » checkbox alignment (WinBox v3.22 required);
– winbox – fixed « Frequency » and « Secondary Frequency » parameter inheritance from « CAPs Channel » configuration;
– winbox – fixed « Passthr. MAC Address » parameter display « LTE APNs » menu;
– winbox – fixed « Switch » menu on CRS354-48P-4S+2Q+;
– winbox – fixed « dst-port » unsetting in « IP->Hotspot->Walled Garden » menu;
– winbox – fixed automatic « IPv6->Firewall->Address List » table update;
– winbox – fixed bonding type interface support for « Switch->Host » table;
– winbox – made « none » the default value for « Security Profile » parameter when creating a new « Wirelees->Connect list » entry;
– winbox – made « yes » the default value for « Inject Summary LSAs » parameter when creating a new NSSA or STUB area;
– winbox – properly show « Hw. Offload Group » value for each interface under « Bridge->Ports » menu;
– winbox – removed duplicate « join-eui », « dev-eui », « counter », « chain », « size » and « payload » parameters under « Lora/Traffic »;
– winbox – renamed « Memory used » to « HDD used » for HDD type under « Tools->Graphing->Resource Graphs »;
– winbox – renamed « Routerboard » to « RouterBOARD » under « System/RouterBOARD » menu;
– winbox – show « Hardware Offload » parameter for bonding interfaces;
– winbox – show « System/RouterBOARD/Mode Button » on devices that have such feature;
– winbox – updated icon design;
– wireless – added « U-NII-2 » support for hAP ac2 and RBwAPGR series devices;
– wireless – allow using « russia4 » regulatory domain on RU locked devices;
– wireless – enabled unicast flood for DHCP traffic on ARM architecture access points;
– wireless – fixed default « antenna-gain » setting on SXT 2 and LtAP series devices;
– wireless – updated « indonesia4 » regulatory domain information;
– www – added « tls-version » parameter in « IP->Services » menu (CLI only);
Télécharger