MikroTik RouterOS MMIPS Firmware 6.41 RC 9
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: routeros-mmips-6.41rc9.npk.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
Important note!!! Backup before upgrade!
– RouterOS (v6.40rc36-rc40 and) v6.41rc1+ contains new bridge implementation that supports hardware offloading (hw-offload).
– This update will convert all interface « master-port » configuration into new bridge configuration, and eliminate « master-port » option as such.
– Bridge will handle all Layer2 forwarding and the use of switch-chip (hw-offload) will be automatically turned on based on appropriate conditions.
– The rest of RouterOS Switch specific configuration remains untouched in usual menus for now.
– Please, note that downgrading to previous RouterOS versions will not restore « master-port » configuration, so use backups to restore configuration on downgrade.
What’s new in 6.41rc9 (2017-Aug-03 12:02):
– certificate – fixed SCEP « get » request URL encoding;
– dhcpv6-client – fixed IA evaluation order;
– l2tp-server – fixed PPP services becoming unresponsive after changes on L2TP server with IPSec configuration;
– lcd – fixed LCD blinking on RB2011 (introduced in 6.40);
– lte – added initial passthrough support for wAP LTE;
– pppoe-client – fixed wrong auto MRU detection over VLAN interfaces;
– pppoe-server – fixed situation when PPPoE servers become invalid on reboot;
– sfp – fixed invalid temperature readings when ambient temperature is below 0C;
Other changes since 6.40:
– bridge – implemented software based vlan-aware bridges;
– https://wiki.mikrotik.com/wiki/Manual:Interface/Bridge#Bridge_VLAN_Filtering
– switch – « master-port » conversion into a bridge with hardware offload « hw » option (CLI only);
– https://wiki.mikrotik.com/wiki/Manual:Switch_Chip_Features#Bridge_Hardware_Offloading
– bridge – general development of hw-offload bridge implementation (introduced in v6.40rc36);
– arp – fixed invalid static ARP entries after reboot on interfaces without IP address;
– bonding – improved relialibility on bonding interface removal;
– bridge – fixed ARP setting (introduced in v6.40rc36);
– bridge – fixed multicast forwarding (introduced in v6.40rc36);
– bridge – implemented dynamic entries for active MST port overrides;
– bridge – implemented software based « igmp-snooping » (CLI only);
– bridge – implemented software based MSTP (CLI only);
– bridge – removed « frame-types » and « ingress-filtering » for bridge interfaces (introduced in v6.40rc36);
– bridge – show « admin-mac » only if « auto-mac=no »;
– btest – improved reliability on Bandwidth Test when device`s RAM is almost full;
– certificate – show « Expired » flag when initial CRL fetch fails;
– CRS3xx – switch VLAN configuration integrated within bridge VLAN configuration with hw-offload;
– dhcpv6-client – do not run DHCPv6 client when IPv6 package is disabled;
– e-mail – do not show errors when sending e-mail from script;
– export – fixed export for different parameters where numerical range or constant string is expected;
– firewall – properly remove « address-list » entry after timeout ends;
– hotspot – improved user statistics collection process;
– interface – improved interface state change handling when multiple interfaces are affected at the same time;
– ippool6 – try to assign desired prefix for client if prefix is not being already used;
– ipv6 – fixed IPv6 address request from pool (introduced in 6.41rc1);
– lte – allow to specify the MAC address for passthrough mode;
– lte – fixed LTE not passing any traffic while in running state;
– ovpn-client – fixed incorrect netmask usage for pushed routes;
– ppp – added support for Sierra MC7750, Verizon USB730L;
– pppoe-client – fixed incorrectly formed PADT packet;
– rb2011 – fixed possible LCD blinking along with Ethernet LED;
– rb922 – restored missing wireless interface on some boards;
– sftp – added functionality which imports « .auto.rsc » file or reboots router on « .auto.npk » upload;
– torch – fixed Torch on PPP tunnels (introduced in 6.40);
– trafficgen – fixed « lost-ratio » showing incorrect statistics after multiple sequences;
– winbox – added « none-dynamic » and « none-static » options for « address-list-timeout » parameter under NAT, Mangle and RAW rules;
– winbox – do not show duplicate filter parameters « Published » in ARP list;
– winbox – show warnings under « /system routerboard settings » menu;
Télécharger