MikroTik RouterOS MIPSBE Firmware 6.46 RC 1
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: all_packages-mipsbe-6.46rc1.zip.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
MAJOR CHANGES IN v6.46:
– lora – added support for LoRaWAN low-power wide-area network technology for MIPSBE, MMIPS and ARM;
– package – accept only packages with original filenames (CVE-2019-3976);
– package – improved package signature verification (CVE-2019-3977);
– security – fixed improper handling of DNS responses (CVE-2019-3978, CVE-2019-3979);
Changements dans cette version:
– ptp – disabled support for IEEE 1588 Precision Clock Synchronization Protocol until further notice;
– bridge – do not add dynamically VLAN entry when changing « pvid » property for non-vlan aware bridge;
– capsman – fixed MAC address detection for « common-name » parameter in certificate requests;
– certificate – added progress bar when creating certificate request;
– certificate – allow specifying « name » parameter for import (CLI only);
– crs3xx – improved system stability when initializing SFP modules;
– export – always export « ssid » value for w60g interfaces;
– fetch – do not allocate extra 500KiB on SMIPS;
– ipsec – fixed IPsec policy checking on RB4011 (introduced in v6.46beta68);
– switch – added « comment » property for switch vlan menu (CLI only);
– w60g – do not reset link when changing comment on station;
– w60g – fixed « monitor » command on disabled interfaces;
– w60g – move stations to new bridge when « put-in-bridge » parameter is changed;
– winbox – added enable/disable and comment buttons for « IP->SNMP->Communities » menu;
– winbox – fixed field validation with negative integers (introduced in v6.46beta);
– wireless – added « ETSI » regulatory domain information;
Other changes since v6.45.7:
– backup – fixed automatic backup file generation when configuration reset by button;
– backup – store automatically created backup file in « flash » directory;
– bonding – correctly remove HW offloaded bonding with ARP monitoring;
– bonding – properly handle MAC addresses when bonding WLAN interfaces;
– bridge – disable/enable bridge port when setting bpdu-guard;
– bridge – do not add bridge as untagged VLAN member when frame-types=admit-only-vlan-tagged;
– bridge – include whole VLAN-id in DHCP Option 82 message;
– btest – removed duplicate « duration » parameter;
– capsman – fixed background scan showing incorrect regulatory domain mismatch error (CAP upgrade required);
– capsman – fixed channel auto reselection;
– capsman – improved DFS channel switching when radar detected;
– capsman – improved radar detection algorithm;
– ccr – improved general system stability;
– certificate – added progress bar when creating certificate request (CLI only);
– certificate – added support for certificate request signing with EC keys;
– certificate – allow specifying « file-name » parameter for export (CLI only);
– certificate – allow specifying « name » parameter for import (CLI only);
– certificate – improved CRL updating process;
– certificate – removed « key-size » parameter for « create-certificate-request » command;
– chr – added support for Azure guest agent;
– console – added bitwise operator support for « ip6 » data type;
– console – fixed « address » column width when printing DHCPv4 leases;
– console – fixed IP conversion to « num » data type;
– console – fixed « tobool » conversion;
– console – properly detect IPv6 address as « ip6 » data type;
– crs1xx/2xx – allow to set trunk port as mirroring target;
– crs305 – fixed sfp-sfpplus2 – sfp-sfpplus4 interface linking (introduced in v6.46beta28);
– crs3xx – correctly handle L2MTU change;
– crs3xx – do not send pause frames when ethernet « tx-flow-control » is disabled on CRS326/CRS328/CRS305 devices;
– crs3xx – improved interface initialization;
– crs3xx – improved switch-chip resource allocation on CRS317-1G-16S+, CRS309-1G-8S+, CRS312-4C+8XG, CRS326-24S+2Q+ devices;
– crs3xx – improved system stability on CRS309-1G-8S+, CRS312-4C+8XG, CRS326-24S+2Q+ devices;
– crs3xx – remove previously set mirror-source property before changing it;
– defconf – fixed default configuration generation on SXT R (introduced in v6.46beta28);
– defconf – fixed default configuration loading on RBmAPL-2nD (introduced in v6.45);
– defconf – require « policy » permission to print default configuration;
– dhcpv4-client – allow empty « dhcp-options » parameter when adding new client;
– dhcpv4-client – fixed « dhcp-options » parameter setting when adding new client;
– dhcpv4-server – improved stability when RADIUS Interim update is sent;
– dhcpv6-client – properly update bind time when unused prefix received from the server;
– dhcpv6-client – properly update IPv6 address on rebind;
– dhcpv6-server – fixed logged error message when using « address-pool=static-only »;
– dhcpv6-server – include « User-Name » parameter in accounting requests;
– dhcpv6-server – made « calling-station-id » contain MAC address if DUID contains it;
– dhcvp6-client – fixed timeout when doing rebind;
– dot1x – added « reject-vlan-id » server parameter (CLI only);
– dot1x – added support for dynamic switch rules from RADIUS;
– dot1x – added support for « mac-auth » authentication type (CLI only);
– dude – fixed data retrieval over SNMP (introduced in v6.46beta44);
– ethernet – automatically detect interface when using IP address for power-cycle-ping;
– ethernet – do not enable interface after reboot that is already disabled;
– ethernet – send requests only from ethernet interface when using MAC address for power-cycle-ping;
– fetch – fixed « dst-path » not allowed to create new directories (introduced in v6.46beta34);
– fetch – improved stability when processing large output data;
– gps – use « serial1 » as default port on RBLtAP-2HnD;
– hotspot – fixed « html-directory » not allowed to create new directories (introduced in v6.46beta34);
– hotspot – fixed non-local NAT redirection to port TCP/64873;
– hotspot – fixed RADIUS CoA « address-list » update;
– ike1 – fixed minor spelling mistake in logs;
– ike2 – fixed IPv6 policy generation (introduced in v6.46beta28);
– ike2 – improved CHILD SA rekey process with Apple iOS 13;
– ike2 – improved stability when retransmitting first packet as responder;
– ipsec – added « error » topic for identity check failure logging messages;
– ipsec – fixed DNS resolving when domain has only AAAA entries;
– ipsec – fixed policy « sa-src-address » detection from « local-address » (introduced in v6.45);
– ipv6 – changed « advertise-dns » default value to « yes »;
– led – fixed default LED configuration for RBLHG-2nD and RBLHG-5HPnD;
– log – increased log message length limit to 1024 characters;
– lte – added support for D402 modem;
– lte – added support for LM960A18;
– lte – added support for Telit LM960 and LE910C1 modems;
– lte – do not allow setting 3G and GSM modes on LTE only modems;
– lte – fixed band setting on R11e-4G;
– lte – fixed network registration on R11e-LTE-US;
– lte – fixed Sierra WP7601 driver loading;
– lte – fixed USB network device driver initialization (introduced in v6.46beta9);
– lte – fix « operator » names not being displayed properly;
– lte – improved modem initialization;
– lte – show « primary-band » only for LTE modems;
– lte – use /128 prefix for IPv6 address on LTE interface;
– lte – use interface from RA when « ipv6-interface=none » and IPv6 enabled;
– ppp – added 3GPP IoT « access-technology » definitions;
– ppp – added support for Sierra WP7601;
– ppp – disable DTR send when using at-chat;
– quickset – added « LTE AP Dual » mode support;
– quickset – added « LTE APN » dropdown support;
– quickset – fixed « LTE Band » checkbox display;
– route – fixed area range summary route installation in VRF;
– routerboard – fixed default CPU frequency on RB750r2 (« /system routerboard upgrade » required);
– routerboard – fixed USB configuration export on RBLtAP-2HnD;
– routerboard – hide « memory-frequency » parameter for RBLtAP-2HnD;
– sfp – correctly read EEPROM data from SFP modules (introduced in v6.46beta38);
– sniffer – allow filtering by packet size;
– snmp – added « disabled » and « comment » parameters for communities (CLI only);
– snmp – added option to monitor « link-downs » parameter using MIKROTIK-MIB;
– snmp – fixed « dot1dBasePort » index offset for BRIDGE-MIB;
– snmp – fixed « ifLastChange » OID reporting for IF-MIB;
– snmp – fixed « radio-name » (mtxrWlRtabRadioName) OID support;
– snmp – improved interface status reporting for IfOperStatus OID;
– snmp – improved LLDP interface returned index and type;
– snmp – return only interfaces with MAC addresses for LLDP;
– snmp – use « src-address » also for traps;
– ssh – fixed output printing when « command » parameter used;
– supout – include information from all LTE interfaces;
– supout – removed « file » option from « /system sup-output » command;
– switch – correctly update dynamic switch rule when dhcp-snooping is enabled;
– switch – ignore « default-vlan-id » property after switch reset on RTL8367 switch chip;
– switch – show « external » flag for bridge hosts on MT7621, RTL8367 switch chips;
– system – fixed branding package installation (introduced in v6.46beta34);
– telnet – fixed successful connection establishment output in console (introduced in v6.46beta28);
– timezone – updated time zone database to version 2019c;
– tr069-client – added CellDiagnostics parameter support;
– tr069-client – added LTE band and cellular technology selection parameters;
– tr069-client – added LTE RSCP, ECNO and ICCID parameter support;
– tr069-client – added multiple LTE monitoring parameters;
– tr069-client – fixed firmware update (introduced in v6.46beta34);
– tr069-client – reconnect to ACS when « ConnectionRequestURL » is updated;
– upgrade – improved auto package updating using « check-for-updates »;
– ups – improved compatibility with APC UPS’s;
– usb – general USB modem stability improvements;
– userman – fixed customer referencing on WEB (introduced in v6.46beta9);
– userman – updated Authorize.Net to use SHA512 hashing;
– w60g – added « region » setting to limit allowed frequencies (CLI only);
– webfig – fixed link to Winbox download;
– winbox – added « ip-address » and stats columns in « IP/Kid-Control/Devices » menu;
– winbox – added « public-address-ipv6 » parameter to « IP/Cloud » menu;
– winbox – added « reset-counters » button to « IP/Kid Control/Devices » menu;
– winbox – added « tx-info-field » parameter to « Wireless/W60G » menu;
– winbox – added « Vendor Classes » tab in « IP/DHCP Server » menu;
– winbox – added wireless alignment LED types to « System/LEDs » menu;
– winbox – fixed allowed range for bridge filter « new-priority » parameter;
– winbox – fixed « CAPs Scanner » stopping;
– winbox – fixed « cluster-id » parameter setting in « Routing/BGP/Instances » menu;
– winbox – fixed file locking when uploading multiple files at once;
– winbox – fixed firewall limit parameter support for rates more than 4G;
– winbox – fixed invalid flag presence in « IP/SMB/Shares » menu;
– winbox – fixed « Routing » menu icon presence when there is no routing package installed;
– winbox – improved stability when transfering multiple files between multiple windows;
– winbox – properly show timestamp in file « Creation Time » field;
– winbox – removed « Set CA Passphrase » button from « Certificate » menu;
– winbox – renamed « Queue Limit » to « Queue Size » for « pcq-upload-default » and « pcq-download-default » parameters;
– winbox – replaced « kb » with « KiB » in « Tools/Packet Sniffer » menu;
– winbox – show « Switch » menu on RBwAPGR-5HacD2HnD;
– winbox – show « System/RouterBOARD/Mode Button » on devices that have such feature;
– wireless – added 4 chain MCS support for 802.11n wireless protocol (CLI only);
– wireless – added « indonesia4 » regulatory domain information;
– wireless – added « push-button-5s » value for « wps-mode » parameter;
– wireless – added U-NII-2 support forRBSXTsqG-5acD, RBLHGG-5acD-XL, RBLHGG-5acD, RBLDFG-5acD, RBDiscG-5acD;
– wireless – allow using « canada2 » regulatory domain on US lock devices;
– wireless – fixed 802.11n rate selection when managed by CAPsMAN;
– wireless – fixed RX chain selection;
– wireless – fixed sensor MAC address reporting in TZSP header;
– wireless – improved 802.11ac stability for all ARM devices with wireless;
– wireless – improved IPQ4019, QCA9984, QCA9888 wireless interface stability;
– wireless – updated « ukraine » regulatory domain information;
– wireless – updated « united-states » regulatory domain information;
Télécharger