MikroTik RouterOS MIPS-BE Firmware 6.35 RC 49
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: routeros-mipsbe-6.35rc49.npk.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
What’s new in 6.35rc49:
– dhcpv6 client – fix ia expiration and lifetime validation;
– dhcpv6 server – acquire binding on renew if it does not exist;
– export – exclude default values from export in « /interface l2tp-server server » menu;
– export – fixed rare situations when not whole config was exported;
– leds – fixed AP-CAP led blinking after successful association to CAPsMAN;
– lte – fixed crash on early initialization;
– lte – use timer for modem info;
– ntp – fixed ntp client hangs in reached state;
– rb3011 – fixed sfp compatibility with CCR when using direct attached cables;
– tunnels – fixed performance slowdown on any other tunnel disable/enable;
– winbox – added « pw-type » to « /interface vpls bgp-vpls » menu;
– winbox – added « use-control-word » and « pw-mtu » to « /interface vpls cisco-bgp-vpls » menu;
– winbox – added mtu=auto support to eoipv6 tunnel;
– wireless-rep – use full identity where possible;
– wireless-rep – fixed latency issues with Intel wireless clients;
– mipsbe – (excluding RB4xx and CRS series) fixed rare ethernet tx buffer corruption;
– dhcp6-client – fixed wrong error message;
– address-list – fixed crash in low memory situations;
– tile – fixed performance regression on switch chip (introduced in 6.33rc18);
– tile – fixed l2mtu change (introduced in 6.35rc);
– lcd – fixed branding packet logo drawing on startup;
– lte – replaced signal-strength with rssi in info command;
– nand – fixed reboot loop after upgrade to >v6.35rc43;
– ppp – fixed some clients cannot connect due to LCP restart;
– tool fetch – fixed https cleanup on user stop while handshaking;
– winbox – make build with latest lte changes;
– hotspot – make video tag work properly on hotspot login.html page
– ipsec – fixed crash on policy update;
– ppp – fixed ppp crash if lcp packets were lost and authentication got delayed;
– chr – try to renew expired license once a hour instead of 100h;
– defconf – fixed default configuration for SXT LTE;
– lte – improve situation when SXT modem never finds operator;
– lte – supported modems now use unsolicited events for network monitoring;
– rb3011 – make ether6-ether10 work if SFP module is present on bootup;
– trafficgen – fixed console arguments;
– fastpath – fixed show rx-bits-per-second on all VLAN interfaces;
– nand – implemented once a week and refresh to improve stored data integrity (will increase sector writes);
– chr – fixed bridge firewall;
– chr – make shutdown request from hyper-v work (might fix other hypervisor as well);
– dude – fixed dude login logging, no more shows as winbox login;
– quickset – fixed invalid date adjusted the signal threshold for the signal chart and refresh rate;
– bonding – fixed crash when creating vlans on bonding interface;
– chr – implemented automatic storage increase on disk image size increase;
– fastpath – improved vlan fastpath;
– map lite – added hardware WPS button support;
– ppp – fixed ppp interface reconnect when uPnP was used;
– quickset – fixed situations when hidden password was passed as ******* from winbox nd webfig;
– routing – fixed routing-marks were not erased from memory when they are not being used;
– winbox – added init-delay option to routerboard settings;
– chr – fixed Hyper-V booting from SCSI;
– chr – fixed Hyper-V on windows 8/10 reboot loop;
– chr – no more installation on first boot;
– winbox – hotspot default-trial user shows profile as « unknown » in Winbox;
– chr – fixed kernel crash when virtual ethernet was not connected to anything in Hyper-V;
– chr – implemented kernel crash saving to autosupout.rif (will utilize additional 24Mb of RAM);
– wireless – fixed crash on nstreme-dual interface stats update;
– capsman – added 802.11g/n band;
– chr – added support for VLAN on Hyper-V;
– hotspot – fixed possible deadlock;
– hotspot – improved html page resistance against attacks;
– l2tp & pppoe – fixed user traffic accounting when fastpath was used;
– pppoe – fixed crash when removing pppoe service;
– winbox – added sfp-mac for GPON interfaces;
– winbox – added support for route action in mangle rules;
– lte – changed AT parsing because supported Huawei modems use unsolicited events instead of polling;
– l2tp – fixed kernel failure (introduced in 6.35rc);
– snmp – fixed getbulk result ordering with multiple request OIDs;
– winbox – make mrru disabled and set mtu+mru to auto by default on new servers;
– fasttrack – fixed timer updating in connections table for fasttrack connections;
– ppp – fixed memory leak high number of pppoe clients to the same server;
– route – fixed filter by routing table;
– winbox – allow to set additional-network-modes;
– winbox – do not show « enable-jumper-reset » setting on devices without serial port;
– winbox – do not show real-tx-power column in current-tx-power by default;
– firewall – added experimental « action=route » in mangle prerouting – that forces packets to specific gateway by ignoring routing decisions (CLI only);
– l2tp – fixed small memory leak on reconnects;
– pppoe – make fast path receive work on tile, arm and x86;
– proxy – fixed ftp request url decode;
– tile – fixed fast path related memory leak;
– RB3011 – fixed time keeping;
– l2tp – implemented l2tp and lns fastpath/fasttrack support;
– pppoe-client – implemented fastpath support;
– console – sort completions/hints in natural order;
– health – swap fan2 and fan3 on CCR1072;
– led – turn on fault led on CCR1072 if CPU too hot;
– lte – changed AT command processing;
– winbox – make additional-network-mode optional for lte interface;
– tile – fixed rare situation when some cores decide not to take part in packet processing till next reboot;
– fastpath – fixed crash when packet arrives on disabled interface;
– capsman – fixed capsman extension channel names;
– console – fixed print follow in « /ip dns cache » menu;
– ethernet – add option to see S-GPON-ONU module, GPON side SN in « /int eth mon sfp# »;
– ethernet – do not allow to set self as master port;
– health – always report fan speed (even if it is 0);
– l2tp – introduced per tunnel allow-fast-path option;
– webfig – fixed firewall rule sorting did not work in other chains except all;
– winbox – allow to set multiple dh-groups;
– winbox – fixed unset options in /routing ospf interface menu;
– wireless-rep – fixed crash on non-HT clients;
– winbox – improved winbox connection loss detection, fixes winbox safe mode;
– wireless-rep – fixed speed issue when connected with Intel 802.11ac;
– snmp – don’t group oids for bulk get with maxreps > 1 ;
– users – added separate RoMoN policy (Winbox v3.2 and above required);
– cerm – revoked certificates not showing as evoked;
– console – show RouterOS Version in /interface wireless scan;
– export – bonding did not show up in global export;
– export – fixed export when ipv6 address was taken from pool;
– fetch – decrease connection idle timeout;
– ipsec – better flush on proposal change;
– webfig – show single item groups as optional values;
– webfig – sort numeric columns numerically even if they contain some text;
– winbox – added /interface wireless setup-repeater;
– winbox – added all the rates settings to the capsman;
– winbox – added flip-screen option to lcd settings;
– winbox – added missing eap-ttls-mschamv2 method to wireless security profile;
– winbox – added support for new settings from wireless-rep package;
– winbox – disable autostart for wireless scan,snooper,align etc. on open;
– wireless – fixed crash when ap is in cap mode (introduced in v6.35rc15);
– snmp – fixed dhcpv4 lease hwaddr format according to mib;
– dude – (changes discussed here: http://forum.mikrotik.com/viewtopic.php?f=8&t=104395);
– pppoe – added rfc4679 support;
– pppoe-server – added pado-delay option;
– ppp – close connection if peer wants to re-authenticate;
– winbox – limit ospf key to 16 symbols;
– snmp – fixed cpu load reporting to 1min average and change oid to 1.3.6.1.4.1.2021.11.10.0;
– mpls – do not reset VPLS on TE tunnel re-optimize;
– interface queue – fixed « no-queue » on upgrade;
– lte – fixed bandlux modem dialing;
– wireless-rep – fixed qos frame-priroty when nv2 protocol used in station-wds mode;
– wireless – improved 1-chain 802.11ac station compatibility with other vendor multichain APs;
– ssl – optimized certificate update;
– ospf – fixed crash when getting neighbor router-id in NBMA area;
– romon-ssh – fixed active addresses for romon user;
– email – fixed send cmd server addr override;
– lte – added ipv6 support for SXT LTE;
– ipsec – fixed multiple consecutive dynamic policy flush;
– winbox – added ipv6 firewall missing log option;
– profiler – classify certificate signing;
– services – do not show ssh entry under ip services if security package is disabled;
– queue – added bucket-size setting to queues (derived from max-limit);
– queue – improve « /queue interface » menu;
– console – update copyright notice;
– ip – rename max-arp-entries to less confusing max-neighbor-entries;
– l2tp – added support for max-sessions;
– l2tp – added support for proxy authentication when receiving forwarded PPPoE sessions;
– l2tp – added support for Hidden AVP, it is needed for proxy authentication;
– ipsec – fixed larval SA refresh for display;
– wireless-rep – added 802.11g/n only band;
– wireless-rep,capsman – added rate config support;
– wireless-rep,capsman – added more configuration settings;
– ssh – simplify login process;
– ups – fixed entering hibernate mode when below battery capacity limit;
– lte – support for zte mf820s2;
– hotspot – clean-up all dead entries at once;
– radius – warn radius client if incorrect secret is being used;
– trafficgen – fixed crash when unexpected stream reappears;
– ipsec – always re-key ph1 because it was possible that ph1 without DPD would expire;
– system – log time changes;
– trafflow – fixed potential deadlock;
– certificate – allow manual crl url addition;
– ipsec – fixed fast ph2 SA addition;
– led – fixed crash on assigned interface removal;
– lte – support Alt38XX modem;
– tile-crypto – fixed minor memory leak;
– wireless-rep – allow to connect to AP after scan;
– wireless-rep – fixed signal leds;
– wireless-rep – request interface name for setup-repeater;
– wireless-rep – adjust roaming scan times;
– wireless-rep – do not allow empty ssid for AP modes;
– ippool6 – fixed potential crash;
– routing – fixed rare kernel failure on different dynamic routing configurations;
– wireless-rep – fixed nv2 protocol;
– route – do not show duplicate gateway on connected route;
– wireless – added new package « wireless-rep »;
– wireless-rep – initial support for station roaming for station mode in 802.11 protocol;
– wireless-rep – added support for wireless repeater mode for 802.11 protocol;
– wireless-rep – added support for wireless background scan for 802.11 protocol;
– wireless-rep – added support for saving wireless scan results to file;
– wireless-rep – added support for wireless scan rounds setting;
– wireless-rep – added WPS client support;
– wireless-rep – added STEP feature for the scan-list.
Télécharger