MikroTik RouterOS MIPS-BE Firmware 6.33 RC 37
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: routeros-mipsbe-6.33rc37.npk.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
What’s new in 6.33rc37:
– net – fix possible never ending loop when bad CDP discovery packet is received;
– log – make default disk file name to reside in flash dir if it exists;
– romon – change port list to be unordered in export;
– capsman – limit number of simultaneous DTLS handshakes;
– capsman – fixed memory leak on CAP joining CAPsMAN when ssld is used;
– DHCP-PD client – timer problem fixed;
– winbox – added allow-fast-path to eoip, gre & ipip;
– winbox – do not show power-cycle properties on non poe ports;
– l2tp: implemented PPPoE over L2TP in LNS mode, RFC3817;
– webfig – some of the setting were shifted to the right;
– packages – allow to reinstall from bundle to separate packages & vice versa;
– packages – prefer out of bundle packages when both of them are installed;
– packages – fix a problem of upgrading bundle package to non bundled ones;
– ipsec – force flow cache validation once in 1h;
– dhcpv6-client – show current server address;
– dhcpv6-client – split out IA ops;
– winbox – make sure that all setting names get shown in full;
– winbox – added poe power-cycle-ping settings to ethernet interfaces;
– ppp – handle properly case were ppp client is given same address for local & remote end;
– winbox – added vlan-mode & vlan-id to virtual-ap interface;
– winbox – added timeout column to ipv6 address lists;
– winbox – show SFP Tx/Rx Power properly;
– winbox – added min-links to bonding interface;
– winbox – do not show health menu on RB951Ui-2HnD;
– winbox – added support for Login-Timeout & MAC-Auth-Mode in hotspot;
– cerm – added option to disable crl download in ‘/certificate settings’;
– winbox – make user ssh key import work again;
– webfig – make « Copy to Access List » work in CAPsMAN Registration Table;
– userman – fix report generation problem which could result in some users being skipped from it;
– winbox – fix to allow cpu-port as mirror-target
– proxy – error.html parsing enhancement to improve performance
– CCR1072 – improve ether1 performance under heavy load
– routerboard – indicate RouterBOOT type in /system routerboard print;
– mpls – properly use mpls mtu for routes;
– cerm – fix key decription for signed certificates;
– trafflow – report flow addresses in v1 and v5 without NAT awerness;
– dhcpv6 – small fixes for dhcp-pd client and ippool6;
– hotspot – add mac-auth-mode setting for mac-as-passwd option;
– hotspot – add login-timeout setting to force login for unauth hosts;
– auto-upgrade – fixed auto upgrade for smipsbe;
– dns – do not create duplicate entries for same dynamic dns server addresses;
– ipsec – fix set on multiple policies which could result in adding non existent dynamic policies to the list;
– email – allow server to be specified as fqdn which is resolved on each send;
– fastpath – eoip,gre,ipip tunnels support fastpath (new per tunnel setting « allow-fast-path »);
– ppp, pptp, l2tp, pppoe – fix ppp compression related crashes;
– cerm – also accept downloaded CRLs in PEM format;
– userman – added ‘history clear’ to allow flushing undo history, which may take up significant amount of memory for huge databases whith hundreds of users;
– health – fix voltage for CRS109, CRS112 and CRS210 if powered from external adapter;
– userman – added phone number support to signup form;
– ip pool6 – try to acquire the same prefix if info matches recently freed;
– ipsec – fix transport mode ph2 ID ports when policy selects specific ip protocol on initiator;
– ipsec – use local-address for phase 1 matching and initiation;
– route – fixed crash on removing route that was aggregated;
– ipsec – fix replay window, was accidently disabled since version 6.30;
– ssh – allow host key import/export;
– ssh – use 2048bit RSA host key when strong-crypto enabled;
– ssh – support RSA keys for user authentication;
– wlan – improved WMM-PowerSave support in wireless-cm2 package;
– pptp & l2tp – fixed problem where android client could not connect if both dns names were not provided (was broken since v6.30);
– auto upgrade – added ability to select which versions to select when upgrading;
– quickset – fixed HomeAP mode;
– lte – improved modem identification to better support multiple identical modems;
– snmp – fix system scripts table;
– tunnels – eoip,eoipv6,gre,gre6,ipip,ipipv6,6to4 tunnels now support dns name as remote address;
– fastpath – active mac-winbox or mac-telnet session no longer suspends fastpath;
– fastpath – added per interface fastpath counters;
– fastpath – added trafflow support in basic ipv4 and fasttrack ipv4 fastpaths;
– ppp – added on-up & on-down scripts to ppp profile;
– winbox – allow to specify dns name in all the tunnels;
– pppoe – added support for MTU > 1492 on PPPoE;
– cerm – fix scep server certificate-reply degenerate PKCS#7 signed-data content;
– ppp-client – added default channels for Alcatel OneTouch L100V;
– defconf – fix for boards that had bridge with only wlan ports;
– ovpn: support OpenWRT ovpn clients (or any other with enable-small option enabled);
– cerm – use certificate file name for imported cert name;
– fetch – fixed error message when error code 200 was received;
– cerm – rebuild crl for local ca if crl file does not exist;
– winbox – make directed broadcasts work for neighbor discovery;
– upnp: automatically adjust mappings to new external ip change;
– ppp – added ppp interface to upnp internals/externals if requested;
– ppp – when adding ipv6 default route use user provided distance;
– userman – allow to correctly enable CoA on router;
– cerm – also accept downloaded CRLs in PEM format;
– cerm – show crl nextupdate time;
– ppp – added CoA support to PPPoE, PPTP & L2TP (Mikrotik-Recv-Limit, Mikrotik-Xmit-Limit, Mikrotik-Rate-Limit, Ascend-Data-Rate, Ascend-XMit-Rate, Session-Timeout);
– ppp – added new option under « ppp aaa » – « use-circuit-id-in-nas-port-id »;
– userman – refresh active sessions/users view dynamically;
– package – added version tag and show everywhere alongside of version number;
– wlan – improved 802.11 protocol single connection TCP performance for ac chipset with cm2 package.
Télécharger