MikroTik RouterOS ARM64 Firmware 6.48 RC 48
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: all_packages-arm64-6.48beta48.zip.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
Important note!!!
– Using this version on CRS354-48G-4S+2Q+RM or CRS354-48P-4S+2Q+RM will cause booting issues and device may need to be reinstalled.
Changements dans cette version:
– bridge – automatically remove extended interfaces when deleting PE device from CB;
– cap – fixed L2MTU path discovery;
– cap – fixed L2MTU setting from CAPsMAN;
– certificate – fixed private key verification for CA certificate during signing process;
– cloud – improved backup generation process;
– crs3xx – fixed CDP packet forwarding for CRS305, CRS318, CRS326-24G-2S+, CRS328 devices;
– crs3xx – fixed port-isolation for CRS305, CRS318, CRS326-24G-2S+, CRS328 devices (introduced in v6.48beta35);
– defconf – fixed default configuration loading on RBmAP-2nD;
– dhcpv4-client – fixed DHCP offer packet parsing with overload option present;
– discovery – fixed occasional wrong Chassis-ID for LLDP packets (introduced in v6.48beta35);
– dot1x – accept priority tagged (VLAN 0) EAP packets on dot1x client;
– fetch – improved SSL handshake processing;
– filesystem – improved long-term filesystem stability and data integrity;
– ike1 – fixed “my-id=address” parameter usage together with certificate authentication;
– ike2 – added support for IKEv2 Message Fragmentation (RFC7383);
– ike2 – fixed EAP MSK length validation;
– ike2 – fixed too small payload parsing;
– interface – added temperature warning and interface disable on overheat for SFP and SFP+ interfaces (CLI only);
– led – fixed state persistence after device reboot on NetMetal 5 ac devices;
– lora – fixed device going into “ERROR” state caused by FSK modulated downlinks;
– lte – fixed “band” value reporting;
– lte – fixed multiple APN passthrough on R11e-4G;
– lte – improved EARFCN reporting in 3G and LTE modes on Sierra modems;
– lte – limit allowed APN count to 3 on R11e-LTE;
– m33g – added support for “/system gpio” menu (CLI only);
– mpls – fixed duplicate “LabelRelease” message sending;
– profile – improved idle process detection on x86 processors;
– profile – improved process classification on ARM devices;
– quickset – added “Port Mapping” to QuickSet;
– quickset – fixed local IP address setting on master interface;
– radius – added “Service-Type” attribute to Access-Request for IPv4 and IPv6 DHCP servers;
– routerboard – fixed PCIe bus reset during power-on on MMIPS devices (“/system routerboard upgrade” required);
– routerboard – force power-down on PCIe bus during reboot on LHGR devices (“/system routerboard upgrade” required);
– script – added error message in the logs if startup script runtime limit was exceeded;
– snmp – added information from IPsec “active-peers” menu to MIKROTIK-MIB;
– snmp – added new LTE monitoring OID’s to MIKROTIK-MIB;
– switch – fixed Ethernet padding for small packets;
– tr069-client – fixed RouterOS downgrade procedure;
– traffic-flow – added NAT event logging support for IPFIX;
– traffic-generator – fixed 32Gbps limitation;
– user – improved WinBox and The Dude authenticated session handling;
– user-manager – do not allow creating limitation that crosses midnight;
– user-manager – updated PayPal’s root certificate authorities;
– vrrp – made “password” parameter sensitive;
– w60g – general stability and performance improvements;
– wireless – added support for US FCC UNII-2 and Canada country profiles for NetMetal series devices;
– wireless – do not override MTU and ARP values from CAPsMAN with local forwarding;
– wireless – fixed incorrect wireless capability information in association response frames;
– wireless – updated “no_country_set” regulatory domain information;
Other changes since v6.47.4:
– arm64 – improved reboot reason reporting in log;
– arm – added support for automatic CPU frequency stepping for IPQ4018/IPQ4019 devices;
– arm – improved watchdog and kernel panic reporting in log after reboots on IPQ4018/IPQ4019 devices;
– bonding – added LACP monitoring (CLI only);
– bonding – removed “sys-id” and “sys-priority” from monitor-slaves command;
– bridge – added minor fixes and improvements for IGMP snooping with HW offloading;
– bridge – added warning message when port is disabled by the BPDU guard;
– bridge – allow to exclude interfaces from extended ports (CLI only);
– bridge – correctly remove dynamic VLAN assignment for bridge ports;
– bridge – fixed BPDU guard port disable/enable on HW offloaded interfaces;
– bridge – fixed dynamic VLAN assignment when changing port “frame-type” property (introduced in v6.46);
– bridge – fixed dynamic VLAN assignment when changing port to tagged VLAN member;
– bridge – fixed link-local multicast forwarding when IGMP snooping and HW offloading is enabled;
– bridge – fixed local MAC address removal from host table when deleting bridge interface;
– bridge – fixed MDB entry removal when using bridge port “fast-leave” property;
– bridge – fixed multicast table printing;
– bridge – fixed packet forwarding for CAP and BCP controlled interfaces (introduced in v6.48beta12);
– bridge – improved BPDU guard logging;
– bridge – increased multicast table size to 4K entries;
– bridge – show error when switch do not support controlling bridge or port extension (CLI only);
– bridge – show “H” flag for extended bridge ports;
– certificate – clear challenge password on renew;
– chr – improved interface loading on startup on XEN;
– chr – improved system stability when changing flow control settings on e1000;
– conntrack – automatically reduce connection tracking timeouts when table is full;
– console – allow “once” parameter for bonding monitoring;
– crs3xx – added initial Bridge Port Extender support (CLI only);
– crs3xx – added initial Controlling Bridge support for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices (CLI only);
– crs3xx – added switch-cpu port VLAN filtering (switch-cpu port is now mapped with bridge interface VLAN membership when vlan-filtering is enabled);
– crs3xx – fixed “custom-drop-packet” and “not-learned” switch stats for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
– crs3xx – fixed duplicate host entries when creating static switch hosts;
– crs3xx – fixed “mirror-source” property on switch port disable for CRS305, CRS326-24G-2S+, CRS328, CRS318 devices;
– crs3xx – fixed port isolation for “switch-cpu” port for CRS305, CRS326-24G-2S+, CRS328, CRS318 devices;
– crs3xx – fixed port isolation removal for “switch-cpu” port on CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
– crs3xx – fixed “storm-rate” traffic limiting for switch-cpu port on CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
– crs3xx – fixed switch “copy-to-cpu” property for CRS305, CRS318, CRS326-24G-2S+, CRS328 devices;
– crs3xx – fixed switch “not-learned” stats for CRS305, CRS326-24G-2S+, CRS328-24P-4S+, CRS328-4C-20S-4S+, CRS318 devices;
– crs3xx – fixed VLAN tagged packet forwarding on “switch-cpu” port for CRS305, CRS326-24G-2S+, CRS328, CRS318 devices (introduced in v6.48beta12);
– defconf – improved CAP interface bridging;
– defconf – improved default configuration generation on devices with non-default wireless interface names;
– defconf – improved default configuration generation on devices without wireless package installed;
– detnet – fixed malformed dummy DHCP User Class option;
– detnet – use MAC address from bridge interface instead of slave port;
– dhcpv4-server – improved “client-id” value parsing;
– dhcpv6-server – added ability to generate binding on first request;
– discovery – added “lldp-med-net-policy-vlan” property for assigning VLAN ID (CLI only);
– discovery – allow choosing which discovery protocol is used (CLI only);
– discovery – fixed discovery on mesh ports;
– discovery – fixed discovery packet sending on newly bridged port with “protocol-mode=none”;
– discovery – fixed discovery when enabled only on master port;
– discovery – send the same “Chassis ID” on all interfaces for LLDP packets;
– discovery – use interface MAC address when sending MNDP from slave port;
– dns – added IPv6 support for DoH;
– dns – do not use type “A” for static entries with unspecified type;
– dns – fixed listening for DNS queries when only dynamic static entries exist (introduced in v6.47);
– export – fixed RouterBOARD USB “type” parameter export;
– filesystem – fixed repartition on non-first partition;
– filesystem – fixed repartition on RB4011 series devices;
– gps – fixed “init-channel” release when not used;
– health – changed PSU state parameter type to read-only;
– health – removed unused “heater-control” and “heater-threshold” parameters;
– hotspot – added support for captive portal advertising using DHCP (RFC7710);
– hotspot – added “vlan-id” parameter support for hosts and HTML pages;
– hotspot – improved management service stability when receiving bogus packets;
– ike1 – allow using “my-id” parameter with XAuth;
– ike1 – fixed policy update with and without mode configuration;
– ike1 – rekey phase 1 as responder for Windows initiators;
– ike2 – added “prf-algorithm” support for phase 1;
– ike2 – improved child SA rekeying process;
– ipsec – added SHA384 hash algorithm support for phase 1 (CLI only);
– ipsec – do not kill connection when peer’s “name” or “comment” is changed;
– ipsec – fixed client certificate usage when certificate is renewed with SCEP;
– ipsec – fixed multiple warning message display for peers;
– ipsec – inactivate peer’s policy on disconnect;
– ipsec – refresh peer’s DNS only when phase 1 is down;
– kidcontrol – allow creating static device entries without assigned user;
– leds – fixed LED type setting;
– lora – expose “joinEui” un “devEui” values in the log;
– lte – added “age” column and “max-age” parameter to “cell-monitor” (CLI only);
– lte – added “comment” parameter for APN profiles;
– lte – added support for Alcatel IK41VE1;
– ospf – optimized LSA printing for smaller message sizes;
– ppp – added “ipv6-routes” parameter to “secrets” menu;
– ppp – added support for “Framed-IPv6-Route” RADIUS attribute;
– route – improved stability when 6to4 interface is configured with disabled IPv6 package;
– snmp – added information from IPsec “active-peers” menu to MIKROTIK-MIB;
– snmp – fixed value types for “dot1dStp”;
– snmp – fixed value types for “dot1qPvid”;
– ssh – fixed returned output saving to file when “output-to-file” parameter is used;
– ssh – skip interactive authentication when not running in interactive mode;
– supout – added bonding interface monitor information;
– switch – fixed Ethernet padding for small packets;
– system – replace “3” in superscript to “^3” on RBD53GR devices;
– tr069-client – added additional wireless registration table parameters;
– tr069-client – added LTE model and revision parameters;
– tr069-client – added wireless “noise-floor” and “overall-tx-ccq” information parameters;
– tr069-client – added “X_MIKROTIK_MimoRSRP” parameter for LTE RSRP value reporting;
– tr069-client – allow passing LTE firmware update URL as XML;
– tr069-client – send correct “ConnectionRequestURL” when using IPv6;
– traffic-flow – added NAT event logging support for IPFIX;
– traffic-flow – added “sys-init-time” parameter support;
– user-manager – do not allow creating limitation that crosses midnight;
– webfig – fixed default value presence when creating new entries under “IP->Kid Control”;
– winbox – allow performing “USB Power Reset” on “0” bus on RBM33G;
– winbox – fixed “IP->Kid Control->Devices” table automatic refreshing;
– winbox – fixed minor typo in “Users” menu;
– winbox – fixed “receive-errors” setting persistence under “Wireless/Wireless Sniffer/Settings” menu;
– winbox – fixed “tls-version” parameter setting under “IP/Services” menu;
– winbox – use health values reported by gauges for “System/Health” menu;
– wireless – create “connect-list” rule when address specified for “setup-repeater”;
– wireless – improved WPS process stability;
– wireless – updated “no_country_set” regulatory domain information;
Télécharger