Kramer VP-747 Presentation Scaler-Switcher Firmware 1.10 Master
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: vp-747_master_firmware_upgrade_package_v.1.10.zip.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
The following changes were made in this version:
Corrections:
– The device did not work properly in temperatures below 5°C.
Upgrade procedure
1. Before starting the upgrade procedure please verify that on your VP-747 is installed the latest slave firmware version. All necessary files are available from the Kramer Website.
2. Make sure RS232 with null-modem cable is connected to VP-747.
3. Switch VP-747 ON and verify in OSD that the Baud Rate (Utility>Misc Setting>Baud Rate) is set to 115200.
4. Start software ”VP-7X7 FWUpgrade”.
5. In the upper field choose appropriate COM port.
Télécharger