Kilpatrick Audio K1600 MIDI Converter Firmware 1.31
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: K1600-midi_converter-1.31.zip.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
Corrections:
– additional bug fixes and improvements
all the improvements of version 1.21:
– added Arp-Odyssey duophonic mode
– clock divider setting now changed on channel 16 only
– clock divider behavior now sends a pulse on first tick following a start message
all the improvements of version 1.30:
– configurable legato retrigger mode for voices
– MIDI start, continue and stop handling improvements
– reset pulse output when MIDI start is received – better compatibility with analog sequencers
– MIDI song position pointer works with any clock division
Procédure de mise à jour du micrologiciel:
– Select MIDI Ports and Update File
Select the MIDI IN and OUT ports that are connected to the product. Browse for the firmware update file. Do not rename the file as the specific extension is meaningful.
When updating K1600 firmware: Set the MIDI switch to THRU.
When updating a module connected to a K1600 internally: Set the MIDI switch to OUT.
– Start the update
Make sure that your product is on and then press Update to start the procedure.
When updating a K1600 firmware: Turn on the power to the module after pressing the Update button.
– Wait for the Update to Complete
The update procedure should complete in less than 1 minute. If you see an error or the progress bar doesn’t increase right away then check your connections and try again. The procedure will fail if the product doesn’t respond within 10 seconds.
– Power Cycle the Product
Unplug and plug in your product to boot up in the new firmware. You should now be able to take advantage of the new features!
Télécharger