Keysight N8262A Modular Power Meter Firmware A.05.04
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: N8262A_A.05.04.exe.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
Revision History:
Enhancement:
– Add new flash file system to provide compatibility on the new processor board (P1002).
– New preset for LTE.
– Compatible with N8480 power sensors including Q band, R band, B model and H model.
– Enable external triggering in Peak measurement mode.
– Compatible with N8480 power sensors including CFT option.
– Enable hardware triggering for average power measurement
* Enable external triggering in CW measurement mode
* FW implementation to meet the 2048 buffer size memory requirement to store the measured readings up to 2048
* Assertion of external event through TRIG OUT upon measurement completion by handshaking with the synthesizer
* Enable SCPI commands to set the start frequency and an auto frequency step, then enable the meter to step to new freq for each external trigger and returns corrected power readings (user will not need to do the correction at the external PC)
– CCDF graphical display for complex digital modulations
– Backward compatibility with E932x power sensors
– Preset wireless format: WiMAX, HSDPA, DME and DME P-TMP
– Minimum power measurement capability
– Enhancement of Radar/Pulse measurement
– Auto scale and auto gate to fit the pulse to screen
– Duty cycle display for pulse measurement
Bugs fixed:
– Resolved linearity type selection inconsistency.
– Resolved missing trigger output signal in fast mode.
– Resolved measurement inaccuracy for GSM signal.
– Resolved issue where inaccurate average power measurement is obtained when power/frequency sweep in FAST mode and hardware triggering is used
– Resolved negative slope trigger
– Resolved inconsistent rise and fall time measurements.
– Resolved self-test failure on calibrator
Télécharger