JVC DLA-X9000 Projector Firmware 83_2
Type de fichier: Firmware.
Système d’exploitation: Windows 10, Windows 7, Windows 8, Windows 8.1.
Nom de fichier: MainUpdate_u83_2.zip.
Bit: 64 Bit.
Licence: Gratuit.
Description
Update:
– Plug in the AC cord and make sure the STANDBY LED illuminates.
– Double click the “ILAFPJ2013_UP_GRADER.exe” file in the “upgrader_1button” sub-folder
1. Select the appropriate COM port.
2. Click the “…” Browse button to locate and select the “Main_u83_2.srec” update file in the “MainUpdate_u83_2” folder.
3. Click the “Write all flash” button.
– The STANDBY indicator will change to green during the update:
– This update will take approximately 3 minutes to complete. You should see the screen on the right during the update process.
– After the update is finished, the complete window will pop-up. Also, the projector will be in STANDBY mode, with only the STANDBY LED illuminated.
4. Click the ‘OK’ button in the complete window, and then close the ILAFPJ2013_UP_GRADER program.
5. Unplug the AC cord and wait a few seconds for the STANDBY LED to turn off.
6. Disconnect the RS-232C cable from the projector. 7. Plug in the AC cord and power ON the projector.
Note:
Remove all cables from the projector prior to starting this procedure with the exception of the power cable.
Télécharger