Hasselblad H4D-40 Multi-Shot Camera Body Firmware 2.3.3
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: CB141208.hbf.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
This package contains firmware version 2.3.3/16.0.8 for H2D, H3D and H3DII, H4D camera bodies.
Corrections:
– If the tethered camera was in B or T-mode and exposure mode was changed from Phocus, exposure time on the camera was not updated correctly. This is now fixed
– If the tethered camera was set to pending self-timer and then released from Phocus, the sequence was not handled properly. This is also fixed.
Étapes d’installation:
1. Décompressez le fichier téléchargé.
2. Make sure your camera is turned on.
3. Connect the camera to Phocus using a POWERED FireWire cable.
4. Go to “File” and then “Update Firmware” and locate the desired firmware package (CB141208.hbf) on your computer, and click “Update”.
5. Follow the instructions provided from the software carefully! Do not switch off the camera during the update process, unless specifically requested by the Phocus software.
6. When the update has been finalized, please restart your camera and check that the firmware has been successfully updated.
Avis important:
– Manual updating of firmware is available in the Phocus software, from version 2.7 Mac and 2.7 Windows. However, please use the latest version of Phocus for firmware updating. For Windows it is strongly recommended to use the 64 bit version.
– During the upgrade procedure do NOT disconnect the FireWire cable until prompted!
– Le retrait involontaire du câble FireWire au cours de la procédure de téléchargement du firmware pourrait dans le pire des cas rendre la caméra inutilisable, ce qui nécessiterait un service après-vente agréé.
Télécharger