Gigabyte GA-Z97X-UD5H (rev. 1.2) Marvell SATA Preinstall Pilote 1.2.0.1039
Type de fichier: Pilote.
Système d’exploitation: Windows 7, Windows 8, Windows 8.1.
Nom de fichier: mb_driver_marvell_bootdisk_9series.zip.
Bit: 64 Bit.
Licence: Gratuit.
Description
Caractéristiques:
CPU:
– Prise en charge de Intel Core i7 processors/Intel Core i5 processors/Intel Core i3 processors/Intel Pentium processors/Intel Celeron processors in the LGA1150 package
– L3 cache varies with CPU
Chipset:
– Intel Z97 Express Chipset
Memory:
– 4 x DDR3 DIMM sockets supporting up to 32 GB of system memory
– Dual channel memory architecture
– Prise en charge de DDR3 3200(O.C.) / 3100(O.C.) / 3000(O.C.) / 2933(O.C.) / 2800(O.C.) / 2666(O.C.) / 2600(O.C.) / 2500(O.C.) / 2400(O.C.) / 2200(O.C.) / 2133(O.C.) / 2000(O.C.) / 1866(O.C.) / 1800(O.C.) / 1600 / 1333 MHz memory modules
– Prise en charge de non-ECC memory modules
– Prise en charge de Extreme Memory Profile (XMP) memory modules
Onboard Graphics:
– Integrated Graphics Processor – Intel HD Graphics support
– 1 x D-Sub port, supporting a maximum resolution of 1920×1200@60Hz
– 1 x DVI-D port, supporting a maximum resolution of 1920×1200@60Hz
– 1 x HDMI port, supporting a maximum resolution of 4096×2160@24Hz or 2560×1600@60Hz
– Prise en charge de up to 3 displays at the same time
– Maximum shared memory of 512 MB
Audio:
– Realtek ALC1150 codec
– High Definition Audio
– 2/4/5.1/7.1-channel
– Prise en charge de S/PDIF Out
LAN:
– 1 x Qualcomm Atheros Killer E2201 LAN chip (10/100/1000 Mbit) (LAN1)
– 1 x Intel GbE LAN phy (10/100/1000 Mbit) (LAN2)
Expansion Slots:
– 1 x PCI Express x16 slot, running at x16 (PCIEX16)
– 1 x PCI Express x16 slot, running at x8 (PCIEX8)
– 1 x PCI Express x16 slot, running at x4 (PCIEX4)
– 2 x PCI Express x1 slots
– 2 x PCI slots
Multi-Graphics Technology:
– Prise en charge de 3-Way/2-Way AMD CrossFire and 2-Way NVIDIA SLI Technology
Storage Interface:
– 1 x M.2 PCIe connector
– 1 x SATA Express connector
– 6 x SATA 6Gb/s connectors (SATA3 0~5)
– Prise en charge de RAID 0, RAID 1, RAID 5, and RAID 10
Marvell 88SE9172 chip:
– 2 x SATA 6Gb/s connectors (GSATA3 6~7)
– Prise en charge de RAID 0 and RAID 1
USB:
– 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
– 6 USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)
– Chipset + Renesas uPD720210 USB 3.0 Hub: 4 USB 3.0/2.0 ports on the back panel
Internal I/O Connectors:
– 1 x 24-pin ATX main power connector
– 1 x 8-pin ATX 12V power connector
– 1 x PCIe power connector
– 1 x M.2 PCIe connector
– 1 x SATA Express connector
– 8 x SATA 6Gb/s connectors
– 1 x CPU fan header
– 1 x water cooling fan header (CPU_OPT)
– 4 x system fan headers
– 1 x front panel header
– 1 x front panel audio header
– 1 x S/PDIF Out header
– 1 x USB 3.0/2.0 header
– 2 x USB 2.0/1.1 headers
– 1 x serial port header
– 1 x Clear CMOS jumper
– 1 x Trusted Platform Module (TPM) header
– 1 x power button
– 1 x reset button
– 1 x Clear CMOS button
– 2 x BIOS switches
– Voltage Measurement Points
Back Panel Connectors:
– 1 x PS/2 keyboard/mouse port
– 1 x optical S/PDIF Out connector
– 1 x D-Sub port
– 1 x DVI-D port
– 1 x HDMI port
– 6 x USB 3.0/2.0 ports
– 2 x USB 2.0/1.1 ports
– 2 x RJ-45 ports
– 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In)
I/O Controller:
– iTE I/O Controller Chip
H/W Monitoring:
– System voltage detection
– CPU/System/Chipset temperature detection
– CPU/CPU OPT/System fan speed detection
– CPU/System overheating warning
– CPU/CPU OPT/System fan fail warning
– CPU/CPU OPT/System fan speed control
Form Factor:
– ATX Form Factor: 30.5cm x 24.4cm
Télécharger