Gigabyte GA-X99-UD7 WIFI (rev. 1.0) Intel SATA Preinstall Pilote 13.1.0.1058
Type de fichier: Pilote.
Système d’exploitation: Windows 7, Windows 8, Windows 8.1.
Nom de fichier: mb_driver_intel_bootdisk_irst_32_x99.zip.
Bit: 64 Bit.
Licence: Gratuit.
Description
Caractéristiques:
CPU:
– Prise en charge de Intel Core i7 processors in the LGA2011-3 package
– L3 cache varies with CPU
Chipset:
– Intel X99 Express Chipset
Memory:
– 8 x DDR4 DIMM sockets supporting up to 64 GB of system memory
– 4 channel memory architecture
– Prise en charge de DDR4 3000(O.C.) / 2800(O.C.) / 2666(O.C.) / 2400(O.C.) / 2133 MHz memory modules
– Prise en charge de non-ECC memory modules
– Prise en charge de Extreme Memory Profile (XMP) memory modules
– Prise en charge de RDIMM 1Rx8 memory modules (operate in non-ECC mode)
Audio:
– Realtek ALC1150 codec
– High Definition Audio
– 2/4/5.1/7.1-channel
– Prise en charge de S/PDIF Out
LAN:
– 2 x Intel GbE LAN chips (10/100/1000 Mbit)
Wireless Communication module:
– Wi-Fi 802.11 a/b/g/n/ac, supporting 2.4/5 GHz Dual-Band
– Bluetooth 4.0, 3.0+HS, 2.1+EDR
– Prise en charge de 11ac wireless standard and up to 867 Mbps data rate
Expansion Slots:
– 2 x PCI Express x16 slots, running at x16 (PCIE_1, PCIE_2)
– 2 x PCI Express x16 slots, running at x8 (PCIE_3, PCIE_4)
– 3 x PCI Express x1 slots
– 1 x M.2 Socket 1 connector for the wireless communication module (M2_WIFI)
Multi-Graphics Technology:
– Prise en charge de 4-Way/3-Way/2-Way AMD CrossFire/NVIDIA SLI technology
Storage Interface:
– 1 x M.2 PCIe connector
– 1 x SATA Express connector
– 6 x SATA 6Gb/s connectors (SATA3 0~5)
– Prise en charge de RAID 0, RAID 1, RAID 5, and RAID 10
– 4 x SATA 6Gb/s connectors (sSATA3 0~3), supporting IDE and AHCI modes only (An operating system installed on the SATA3 0~5 connectors cannot be used on the sSATA3 0~3 connectors.)
USB:
– 4 x USB 3.0/2.0 ports (available through the internal USB headers)
– 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)
– Chipset + 2 Renesas uPD720210 USB 3.0 Hubs:
– 8 x USB 3.0/2.0 ports on the back panel
Internal I/O Connectors:
– 1 x 24-pin ATX main power connector
– 1 x 8-pin ATX 12V power connector
– 1 x PCIe power connector
– 1 x SATA Express connector
– 10 x SATA 6Gb/s connectors
– 1 x M.2 Socket 3 connector
– 1 x CPU fan header
– 1 x water cooling fan header (CPU_OPT)
– 3 x system fan headers
– 1 x heatsink LED power connector
– 1 x I/O shield audio LED power connector
– 1 x front panel header
– 1 x front panel audio header
– 2 x USB 3.0/2.0 headers
– 2 x USB 2.0/1.1 headers
– 1 x Thunderbolt add-in card connector
– 1 x Clear CMOS jumper
– 1 x power button
– 1 x reset button
– 1 x Clear CMOS button
– 1 x Direct to BIOS button
– 2 x BIOS switches
– Voltage Measurement Points
Back Panel Connectors:
– 1 x PS/2 keyboard/mouse port
– 1 x CPU overclocking button
– 1 x Fast Boot button
– 1 x Clear CMOS button
– 8 x USB 3.0/2.0 ports
– 2 x USB 2.0/1.1 ports
– 2 x RJ-45 ports
– 2 x SMA antenna connectors (2T2R)
– 1 x optical S/PDIF Out connector
– 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In)
I/O Controller:
– iTE I/O Controller Chip
H/W Monitoring:
– System voltage detection
– CPU/System/Chipset temperature detection
– CPU/CPU OPT/System fan speed detection
– CPU/System/Chipset overheating warning
– CPU/CPU OPT/System fan fail warning
– CPU/CPU OPT/System fan speed control
Form Factor:
– E-ATX Form Factor: 30.5cm x 25.9cm
Télécharger