Gigabyte GA-X79-UD3 (rev. 1.0) Fresco USB 3.0 Pilote 3.3.35.0
Type de fichier: Pilote.
Système d’exploitation: Windows 7, Windows Vista, Windows XP.
Nom de fichier: mb_driver_fresco_usb3.exe.
Bit: 64 Bit.
Licence: Gratuit.
Description
CPU
– Prise en charge de Intel Core i7 processors in the LGA2011 package package
– L3 cache varies with CPU
Chipset
– Intel X79 Express Chipset
Memory
– 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory
* Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
– 4 channel memory architecture
– Prise en charge de DDR3 2133/1866/1600/1333/1066 MHz memory modules
– Prise en charge de non-ECC memory modules
– Prise en charge de Extreme Memory Profile (XMP) memory modules
Audio
– Realtek ALC898 codec
– High Definition Audio
– 2/4/5.1/7.1-channel
– Prise en charge de Dolby Home Theater
– Prise en charge de S/PDIF Out
LAN
– 1 x Intel GbE LAN (10/100/1000 Mbit)
Expansion Slots
– 2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2)
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
– 2 x PCI Express x16 slots, running at x8 (PCIEX8_1, PCIEX8_2)
* The PCIEX8_2 slot shares bandwidth with the PCIEX16_2 slot. When the PCIEX8_2 slot is populated, the PCIEX16_2 slot will operate at up to x8 mode.
– 2 x PCI Express x1 slots
– 1 x PCI slot
Multi-Graphics Technology
– Prise en charge de 4-Way/3-Way/2-Way AMD CrossFireX/NVIDIA SLI technology
* The PCIEX16 slots operate at up to x8 mode when 4-Way/3-Way AMD CrossFireX/NVIDIA SLI is enabled.
Storage Interface Chipset:
– 2 x SATA 6Gb/s connectors (SATA3 0/1) supporting up to 2 SATA 6Gb/s devices
– 4 x SATA 3Gb/s connectors (SATA2 2/3/4/5) supporting up to 4 SATA 3Gb/s devices
– Prise en charge de RAID 0, RAID 1, RAID 5, and RAID 10
* When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected.
3 x Marvell 88SE9172 chips:
– 4 x SATA 6Gb/s connectors (GSATA3 6/7/8/9) supporting up to 4 SATA 6Gb/s devices
– 2 x eSATA 6Gb/s connectors on the back panel, supporting up to 2 SATA 6Gb/s devices
– Prise en charge de RAID 0 and RAID 1
USB Chipset:
– Up to 14 USB 2.0/1.1 ports (8 ports on the back panel, 6 ports available through the internal USB headers)
2 x Fresco FL1009 chips:
– Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
Internal I/O Connectors
– 1 x 24-pin ATX main power connector
– 1 x 8-pin ATX 12V power connector
– 6 x SATA 6Gb/s connectors
– 4 x SATA 3Gb/s connectors
– 1 x CPU fan header
– 4 x system fan headers
– 1 x front panel header
– 1 x front panel audio header
– 1 x S/PDIF Out header
– 3 x USB 2.0/1.1 headers
– 1 x USB 3.0/2.0 header
– 1 x serial port header
– 1 x Clear CMOS jumper
– 1 x Trusted Platform Module (TPM) header
Back Panel Connectors
– 1 x PS/2 keyboard/mouse port
– 1 x optical S/PDIF Out connector
– 1 x coaxial S/PDIF Out connector
– 8 x USB 2.0/1.1 ports
– 2 x USB 3.0/2.0 ports
– 2 x eSATA 6Gb/s connectors
– 1 x RJ-45 port
– 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
I/O Controller
– iTE IT8728 chip
H/W Monitoring
– System voltage detection
– CPU/System temperature detection
– CPU/System fan speed detection
– CPU overheating warning
– CPU/System fan fail warning
– CPU/System fan speed control
* Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install.
BIOS
– 2 x 64 Mbit flash
– Use of licensed AMI EFI BIOS
– Prise en charge de DualBIOS
– PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a
Unique Features
– Prise en charge de @BIOS
– Prise en charge de Q-Flash
– Prise en charge de Xpress BIOS Rescue
– Prise en charge de Download Center
– Prise en charge de Xpress Install
– Prise en charge de Xpress Recovery2
– Prise en charge de EasyTune
* Available functions in EasyTune may differ by motherboard model.
– Prise en charge de Smart 6
– Prise en charge de eXtreme Hard Drive (X.H.D)
– Prise en charge de ON/OFF Charge
– Prise en charge de Cloud OC
– Prise en charge de 3TB+ Unlock
– Prise en charge de TouchBIOS
– Prise en charge de Q-Share
Bundle Software
– Norton Internet Security (OEM version)
Form Factor
– ATX Form Factor; 30.5cm x 24.4cm
Il est fortement recommandé de toujours utiliser la version de pilote la plus récente disponible.
N’oubliez pas de consulter notre site aussi souvent que possible afin de rester à jour sur les derniers pilotes, logiciels et jeux.
Essayez de définir un point de restauration système avant d’installer un pilote de périphérique. Cela vous aidera si vous avez installé un mauvais pilote. Des problèmes peuvent survenir lorsque votre périphérique matériel est trop ancien ou n’est plus pris en charge.
Télécharger