Gigabyte GA-M52L-S3P (rev. 2.3) Nvidia SATA AHCI Preinstall Pilote 15.56 pour Windows 7 x86
Type de fichier: Pilote.
Système d’exploitation: Windows 7.
Nom de fichier: motherboard_driver_ahci_nvidia_mcp68_bootdisk_win7-32bit.exe.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
CPU
– Prise en charge de Socket AM3/ AM2+/ AM2 processors: AMD PhenomII processor/ AMD Phenom / AMD AthlonII processor/ AMD Athlon processor/ AMD Sempron processor
*Note: If you install AMD AM3/AM2+ CPU on AM2 motherbord, the system bus speed will downgrade from HT3.0(5200MT/s) to HT1.0(2000 MT/s) spec; however, the frequency of AM3/AM2+ CPU will not be impacted. Please refer “CPU Support List” for more information.
Hyper Transport Bus
– 2000 MT/s
Chipset
– NVIDIA nForce 520LE chipset
Memory
– 4 x 1.8V DDR2 DIMM sockets supporting up to 16GB of system memory (Note 1)
– Dual channel memory architecture
– Prise en charge de DDR2 1066/800 MHz memory modules
Audio
– Realtek ALC892 codec
– High Definition Audio
– 2/4/5.1/7.1-channel
– Prise en charge de S/PDIF In/Out
– Prise en charge de CD In
LAN
– Realtek RTL 8201 chip (10/100 Mbit)
Expansion Slots
– 1 x PCI Express x16 slot, running at x16
– 2 x PCI Express x1 slot
– 4 x PCI slots
Storage Interface
Integrated in the chipset:
– 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
– 2 x SATA 3Gb/s connectors supporting up to 2 SATA 3Gb/s devices
– Prise en charge de SATA RAID 0 and RAID 1
iTE IT8720 chip:
– 1 x floppy disk drive connector supporting up to 1 floppy disk drive
USB
Integrated in the chipset
– Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers)
Internal I/O Connectors
– 1 x 24-pin ATX power connector
– 1 x 4-pin ATX 12V power connector
– 1 x floppy disk drive connector
– 1 x IDE connector
– 2 x SATA 3Gb/s connectors
– 1 x CPU fan header
– 1 x system fan header
– 1 x power fan header
– 1 x front panel header
– 1 x front panel audio header
– 1 x CD In connector
– 1 x S/PDIF In header
– 1 x S/PDIF Out header
– 2 x USB 2.0/1.1 headers
– 1 x clearing CMOS jumper
Back Panel Connectors
– 1 x PS/2 keyboard port
– 1 x PS/2 mouse port
– 1 x parallel port
– 1 x serial port
– 1 x coaxial S/PDIF Out
– 4 x USB 2.0/1.1 ports
– 1 x RJ-45 port
– 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
I/O Controller
– IT8720 chip
H/W Monitoring
– System voltage detection
– System temperature detection
– CPU / System fan speed detection
– CPU / System overheating warning
– CPU / System fan failure warning
– CPU / system fan speed control (Note 2)
BIOS
– 2 x 8Mbit flash
– Use of licensed AWARD BIOS
– Prise en charge de DualBIOS
– PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b
Unique Features
– Prise en charge de @BIOS
– Prise en charge de Q-Flash
– Prise en charge de Xpress BIOS Rescue
– Prise en charge de Download Center
– Prise en charge de Xpress Install
– Prise en charge de Xpress Recovery2
– Prise en charge de EasyTune (Note 3)
– Prise en charge de Auto Green
– Prise en charge de On/Off Charge
Bundle Software
– Norton Internet Security (OEM version)
Form Factor
– ATX form factor; 30.5cm x 21.5cm
Note
(Note 1) Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
(Note 2) Whether the CPU / system fan speed control function is supported will depend on the CPU cooler you install.
(Note 3) Available functions in EasyTune may differ by motherboard model.
Il est fortement recommandé de toujours utiliser la version de pilote la plus récente disponible.
N’oubliez pas de consulter notre site aussi souvent que possible afin de rester à jour sur les derniers pilotes, logiciels et jeux.
Essayez de définir un point de restauration système avant d’installer un pilote de périphérique. Cela vous aidera si vous avez installé un mauvais pilote. Des problèmes peuvent survenir lorsque votre périphérique matériel est trop ancien ou n’est plus pris en charge.
Télécharger