Gigabyte GA-H61M-DS2 (rev. 2.2) Intel SATA AHCI/ RAID Preinstall Pilote 10.6.0.1002 pour x86
Type de fichier: Pilote.
Système d’exploitation: Windows 7, Windows Vista, Windows XP.
Nom de fichier: motherboard_driver_intel_sataraid_bootdisk_irst_32.exe.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
CPU
– Prise en charge de Intel Core i7 processors/Intel Core i5 processors/ Intel Core i3 processors/Intel Pentium processors/Intel Celeron processors in the LGA1155 package
– L3 cache varies with CPU
Chipset
– Intel H61 Express Chipset
Memory
– 2 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory
* Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
– Dual channel memory architecture
– Prise en charge de DDR3 1333/1066/800 MHz memory modules
– Prise en charge de non-ECC memory modules
– Prise en charge de Extreme Memory Profile (XMP) memory modules
* To support XMP memory, you must install an Intel 22nm (Ivy Bridge) CPU.
Onboard Graphics
Integrated Graphics Processor:
– 1 x D-Sub port
Audio
– Realtek ALC887 audio codec
– High Definition Audio
– 2/4/5.1/7.1-channel
* To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.
LAN
– 1 x Realtek 8111F chip (10/100/1000 Mbit)
Expansion Slots
– 1 x PCI Express x16 slot, running at x16
– 2 x PCI Express x1 slots
(All PCI Express slots conform to PCI Express 2.0 standard.)
Storage Interface Chipset:
– 4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices
USB Chipset:
– Up to 8 USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
Internal I/O Connectors
– 1 x 24-pin ATX main power connector
– 1 x 4-pin ATX 12V power connector
– 4 x SATA 3Gb/s connectors
– 1 x CPU fan header
– 1 x system fan header
– 1 x front panel header
– 1 x front panel audio header
– 2 x USB 2.0/1.1 headers
– 1 x parallel port header
– 1 x serial port header
– 1 x Clear CMOS jumper
Back Panel Connectors
– 1 x PS/2 keyboard port
– 1 x PS/2 mouse port
– 1 x D-Sub port
– 4 x USB 2.0/1.1 ports
– 1 x RJ-45 port
– 3 x audio jacks (Line In/Line Out/Microphone)
I/O Controller
– iTE I/O Controller Chip
H/W Monitoring
– System voltage detection
– CPU/System temperature detection
– CPU/System fan speed detection
– CPU/System fan speed control
* Whether the CPU/System fan speed control function is supported will depend on the CPU/System cooler you install.
BIOS
– 2 x 32 Mbit flash
– Use of licensed AMI EFI BIOS
– Prise en charge de DualBIOS
– PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a
Bundle Software
– Norton Internet Security (OEM version)
Form Factor
– Micro ATX Form Factor; 22.6cm x 17.4cm
Il est fortement recommandé de toujours utiliser la version de pilote la plus récente disponible.
N’oubliez pas de consulter notre site aussi souvent que possible afin de rester à jour sur les derniers pilotes, logiciels et jeux.
Essayez de définir un point de restauration système avant d’installer un pilote de périphérique. Cela vous aidera si vous avez installé un mauvais pilote. Des problèmes peuvent survenir lorsque votre périphérique matériel est trop ancien ou n’est plus pris en charge.
Télécharger