Fresco Logic USB to VGA/HDMI Dongle Graphics Pilote 1.1.323.0
Type de fichier: Pilote.
Système d’exploitation: Windows 10, Windows 7, Windows 8, Windows 8.1.
Nom de fichier: FLUSBVGA-1.1.323.0.exe.
Bit: 64 Bit.
Licence: Gratuit.
Description
Notes IMPORTANTES:
– For FL2000 in USB 2.0 mode, the maximum resolution is 800×600 only. To get higher resolution, you need to plug into USB 3.0 port.
– During driver installation you see this message: « Driver installation ended prematurely »: This is most likely caused by driver binary being corrupted. The solution is to remove the corrupted binary and re-install the driver. A script is needed because the binary is in the protected OS’s driver store.
Please follow the instructions below:
– Attach the USB VGA dongle to your system.
– Unzip « FixDriverInstallPrematurely_v1.0.zip » and open a command window (cmd.exe) with Administrator privilege.
– Execute FixIt.bat
– Re-Install the driver package
– During driver installation you see this message: « Error applying transforms. Verify that the specified transform paths are valid »: After seeing this message and trying to uninstall the driver you see the following message: “Missing x64.msi file ». These messages are caused by a Microsoft Windows installer issue. The solution is to follow the recommended procedure on the Microsoft support site.
Please follow the instructions below:
– Go to the following Microsoft website and review Knowledge Base entry Q299699
– In the Resolution section, steps 4-8 describe how to remove/rename the .mst file
– Find FLUSBVGA.mst in your system. Remove or rename that file.
– Re-install the driver package
Télécharger