Flanders Scientific LM-2130W Monitor Firmware 9.45-1780
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: FW_LM2130W_0.9.45_1780_FSI.img.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
Corrections:
– Updated TWC SAFETY Marker, replaced old TWC marker
– Added 16×9 in 4×3 marker for HD signals
– Shows box outline of 16×9 portion of a 4×3 cutout of an HD video signal
LM Series Monitor Firmware Update Instructions
– Download new firmware file
– Check your monitor model and current firmware version in the monitor’s System Status menu.
If you are currently running firmware older than version 9.53-1907 proceed to step 3.
If you are currently running firmware version 9.53-1907 or later verify the UDisk option found on the monitor’s System Menu is set to ON and then skip to step 7.
– Turn the monitor OFF.
– Connect the provided Firmware Update Cable to the monitor’s GPI port.
– On the monitor’s keypad enter the following sequence: MENU, ENTER, UP, DOWN, MENU, ENTER, UP, DOWN, MENU, DOWN, POWER
– Connect the provided Firmware Update Cable to your computer’s USB port.
– The monitor will appear in Mac’s Finder or PC’s My Computer as mass storage.
– Copy / Paste or Drag and Drop the downloaded Firmware file to the monitor.
– Select Update Firmware from the monitor’s System (Color Management in older firmware versions) menu.
– Reboot the monitor when prompted after the update has succeeded.
Télécharger