Dell Alienware 18 BIOS A12
Type de fichier: BIOS.
Système d’exploitation: AnyOS.
Nom de fichier: AW18A12.exe.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
Dell Alienware 18 System BIOS update compatible with Windows and DOS.
Fixes & Enhancements
Enhancements:
– Disable PCIe Active State Power Management of Nvidia GTX980 MXM Card.
Important Information
– Support NVIDIA Graphic Card GTX970M and GTX980M.
Warning:
Do not turn off your computer or disconnect from your power source while updating the BIOS/Firmware or you may harm your computer. During the update, your computer will restart and you will briefly see a black screen.
Installation instructions
[Run the BIOS update utility from Windows environment]
1. Naviguez jusqu’à l’emplacement où vous avez téléchargé le fichier et double-cliquez sur le nouveau fichier.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
[Run the BIOS update utility from DOS environment, if Legacy Boot mode (Non-Windows users)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select “USB Storage Device” and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. After BIOS update finished, system will auto reboot to take effect.
[Run the BIOS update utility from DOS environment, if UEFI Boot mode with Load Legacy Option disabled (Non-Windows users)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to “Boot Boot List Option”.
3. Change “UEFI” to “Legacy” of Boot List Option
4. Go to “Exit Exit Save Changes” and reboot system.
5. Press F12, then Select “USB Storage Device” and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, system will auto reboot.
8. Go to BIOS Setup by pressing F2 and go to “Boot Boot List Option”.
9. Change “Legacy” to “UEFI” Boot Option.
10. Go to “Exit Exit Save Changes” and reboot system.
Télécharger