D-Link DNS-320L Rev.A1A2A3 NAS Alt-F Firmware 0.1 RC4.1
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: Alt-F-0.1RC4.1-DNS-320L-rev-A1A2A3.bin.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
This is mainly a maintenance release, with all fixes for the RC4 applied and with some other minor fixes and improvements. All users are encouraged to upgrade.
The DNS-320L/LW-rev-Ax and the DNS-320-rev-Bx support is now complete. The circuit boards for the DNS-320L-rev-Ax and DNS-320-rev-Bx are identical apart from a smaller amount of memory in the DNS-320-rev-Bx, so any of them can use the other firmware.
If you are running the vendor’s firmware you don’t have to follow the bellow described procedure. If however you have flashed 0.1RC4 or the experimental releases and applied any fix or patch, you have to manually removed them before upgrading.
In the future this will happens automatically when upgrading, but for now you have to save and execute a file in the box. Rolling fixes back might not work as expected. You also have to disable the « boot user script » if you are using it to apply any fix or patch to the DNS-320-rev-Bx or to the 320L/LW-rev-Ax boxes.
Create a file with the text between the two ‘———–‘ lines below, being sure that #!/bin/sh is at the file first line and column. Then telnet or ssh the box and login as the ‘root’ user using the same password as in the webUI and execute it by typing in the command line:
dos2unix /path/to/saved/file
sh /path/to/saved/file
REMARQUE:
– Reboot the box before performing any upgrade.
– Save current settings to a desktop computer (System->Settings, in the
« Computer Disk » section, « Save current settings to file » hit the Download button)
– Look at the box bottom attached label to see its hardware revision level, then select the appropriate Alt-F-0.1RC5 bin file and use the normal firmware upgrade method to flash it.
For example, the Alt-F-0.1RC5-DNS-320-rev-Ax.bin file is to be used on the DNS-320 on any rev-A1, A2 or A3 box. Don’t try to flash firmware if your box is not supported.
About Network-Attached Storage Updates:
La mise à niveau du micrologiciel NAS (Network-Attached Storage) peut améliorer les performances, la stabilité et la sécurité générales du système en ajoutant divers correctifs aux problèmes associés, en améliorant les fonctionnalités existantes (ou en prenant en charge de nouvelles), ou mise à jour de différentes applications.
En raison du nombre élevé de fabricants de NAS, ainsi que des types de stockage réseau, l’installation d’un nouveau micrologiciel n’est peut-être pas toujours aussi simple qu’il y paraît – et elle n’est pas trop sûre non plus. Ne pas effectuer la mise à jour du logiciel peut entraîner de graves dysfonctionnements du stockage réseau.
Donc, avant même d’envisager d’appliquer cette version, lisez attentivement le guide d’installation et ne démarrez le processus que lorsque vous avez compris et entièrement familiarisé avec toutes les étapes.
De plus, il serait préférable que vous preniez en compte l’utilisation d’un onduleur (onduleur) pour effectuer cette tâche, car aucune interruption de l’alimentation ne devrait affecter la mise à niveau.
Avec tous ces aspects à l’esprit, après avoir lu le guide d’installation, cliquez sur le bouton de téléchargement pour appliquer cette version du firmware sur votre NAS. N’oubliez pas de consulter notre site Web afin de rester au courant des nouveautés.
Télécharger