Cisco 6921 IP Phone Firmware 9.4.1.3
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: cmterm-69xx-sip.9-4-1-3.zip.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
Corrections:
– 69xx phones non standard Not Enough Bandwidth message absent
– « Not enough bandwidth » message shown on 69xx phones after call ends
– 6921 SiP: phone freeze when clear status message
– Default ringtones for 6961 phones not working in version 9-2-1-0
– 69xx phones display « call ended » after services message is sent
– 6941 Unable to disable corporate directory
– Reset network configuration and set Admin Vlan it does not take effect
– 69XX unable to show conference details
– 6941 / 6961 phones may freeze after many successive calls
– RTPRx sent to 6941 phone, but no sound is heard
– CME 6961 – Cannot Tell Which Line has Message Waiting
– 69XX phone fails to play Multicast MoH, user hears Tone on Hold instead
– Service menu down when Publisher goes down – 6941
– Phone go to SRST when DNS server down and no ipv6 address
– 69XX Hebrew words/characters are reversed when XML is parsed
– EM does not work with service provisioning set to both
– CiscoIPPhoneInput backspace key broken if URL is longer than 171 characters
– The Digit dialed when an incoming number pops up are ignored
– Apply TX limiter to limit sending peak level under PSTN Mode
– CP-6921 RTPMTx sets TTL of sent multicast packets to 1
– Blind Transfer caused the line to « lock up » on phone
– 69xx phones non standard Not Enough Bandwidth message absent
– 6961 Active call timer resets to 0 in shared line configuration-the active call timer may reset
– 6961 freezes after many successive calls to it while a call is on hold
– Hold button stops working on 6961
– Switching from speaker to handset doesn’t work on 6961
– Going off hook activates new call on idle line instead of answering call
– 6921 will not go into SRST if default GW is set as SRST reference in DP
– Unable to dial external phone numbers from their personal directory
Télécharger