Broadsoft Snom370 IP Phone Firmware 7.3.4
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: snom370-7.3.4-SIP-f.bin.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
Features:
– duration display for a connected call on (snom370) is hh:mm:ss
– show IVR dtmf on display during connected state (snom370)
– consistent behavior for incoming calls in menu states
– new setting show ivr digits to control digit display while connected (snom360/ 370)
– unicode characters are displayed properly in title line and soft key texts on (snom360)
– added settings subscription delay, terminate subscribers on reboot and functionality (from v6.5)
– show uboot version, uptime and memfree on system info page
– support for $display local, $display remote, $expansion module, $active key in Action URLs (also within path)
– print out uptime and memfree to the (sys)log once a day
– show uboot version on OID 1.3.6.1.2.1.7526.2.4 as well
– new OIDs 1.3.6.1.2.1.7526.2.7 and 1.3.6.1.2.1.7526.2.8 for memfree and uptime respectively
– language files can be loaded via TFTP as well
– modified RTCP so that it also sends SDES CNAME with the RTCP SR
Bugfix:
– missing password warning was shown on display even if setting ignore security warning was enabled (snom370), fixed
– redirection * codes were not working
– setting http scheme doesn’t need restart to get applied
– default value of setting http scheme was wrong, it’s off now
– on error code 500 (which may mean ethernet port isn’t open, most probably due to a switch which blocks it temporarily) retry the request several times
Instructions d’installation:
– Right-click on the appropriate link for your device and choose Copy shortcut:
Open the Web User Interface and navigate to the Software Update page
Paste the link into the Firmware field
(Web User Interface -> Software Update -> Firmware)
– Press Load
The Device reboots and starts the software update.
Note: Do not disconnect the power at any time during this process!
– Check your firmware version afterwards
Télécharger