Atomos Ninja V Recorder Firmware 10.51
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: ATOMNJV_10.51.zip.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
New Features:
– Extended Camera Control via optional Atomos USB to Serial cable
Z Cam Navigation:
– Z Cam menu display can be called up from the Ninja V touchscreen via the camera control menu.
– Note: camera control menu is not possible when recording RAW via HDMI.
– Navigate the camera menu with Menu, Arrow and Enter keys directly via the Ninja V touch screen as well as via the on-camera buttons.
– Function added in Ninja V record menu to force menus to remain active in cases where recording menu and display info is required.
AtomHDR Monitoring Support:
– Support added to AtomHDR engine for Z Cam Zlog2 Gamma when recording video output for recording in ProRes or DNx.
– HLG and PQ monitoring modes allow for the extended dynamic range to be expanded beyond the 6 stop limit of Rec.709 without the need for exposure compensation.
– Native mode allows for view of Zlog2 in its native compressed LOG form.
– Existing Zlog2 3D LUTs can be allied this input for viewing.
– Rec.709 applies a conversion Rec.709 and will may show clipped highlights.
– LUT monitoring option allows you to apply your chosen 3D LUT to the image for monitoring. The LUT will also be applied to the waveform trace, can be burnt in to the recording and/or looped out.
– Zlog2 is output and recorded in Full range and your NLE workflow should be set to match this. The legalize option can be applied to LOG if your NLE workflow requires Legal range footage.
Battery Capacity Warning:
– Separate pop up menu will warn of low battery capacity on either camera or Ninja V.
Corrections:
– Refinement of waveform graticules for monitoring in Rec.709, HLG and PQ modes.
– Fixed issue where the top information bar may report an incorrect monitor mode of LUT.
– Changed the naming convention of AtomX SYNC devices.
– Improvements to the performance of file browser when in playback mode.
– Improved the compatibility of the AutoHDR function in AtomHDR which could cause the Ninja V to intermittently freeze.
Firmware Update Tutorial:
– Download and unzip the file.
– Copy the file onto a recommended, formatted driver, using the docking station included with your recorder.
– Insert the drive into the Atomos recorder while it’s off.
– Power up the Atomos recorder.
– The screen will show flashing lines of color. This is normal – DO NOT power off!
– Updating will take a few minutes.
– Once completed, the Atomos recorder will power down.
– Power up the Atomos recorder again.
– Check Menu > Product Info > AtomOS Version. This should match the version you have just downloaded.
– Enjoy your updated Atomos recorder !
Firmware Recovery Tutorial:
– Power down the Atomos recorder (Hold power button for 4 seconds).
– Hold down the power button for 10 seconds approximately.
– You will see the “Firmware Update Failed” screen.
– Insert your HDD / SSD.
– The install process will begin and the screen will show flashing lines of color. This is normal – DO NOT power off !
– Once completed, the Atomos recorder will power down.
– Enjoy your updated Atomos recorder !
Télécharger