Allen & Heat dLive S7000 Digital Mixer Firmware 1.11
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: AllenHeath-dLive_V1.11-Rev24623.zip.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
Ce paquet fournit les fichiers d’installation nécessaires de la version du micrologiciel Allen & Heath dLive S7000 MixRack 1.11.
Corrections:
– Syncing from an I/O Port could cause clock errors resulting in audible clicks.
– The output relays were not initialised correctly resulting in the outputs being unmuted at power up / down.
– An M-DL-ADAPT I/O Port adapter with no card fitted could cause the MixRack to crash when storing Scenes or changing Mixer Config.
– When firmware updating a DX32, all meters could freeze for 15-20 seconds and control could be lost during this time.
– DX32 firmware update would not work when the DX32 was connected to Surface DX ports.
– Surface DX 5/6 information would not update correctly on the home screen, resulting in a possible red cross.
– Adding or removing an I/O Port card to the Surface would reset the strip layout.
– Recall Filters and Global Scene Safes didn’t affect Inputs and FX Returns On/Off assignments to the Main mix.
– Also includes several other minor fixes.
Étapes d’installation:
1. Téléchargez le dernier firmware and save the .zip file.
2. Remove any previous dLive firmware from your USB drive. To do this, look into the USB AllenHeath-dLive folder and delete the existing Firmware folder and also the Firmware.md5 file. Do not delete other files or folders.
3. Extract the .zip file to the root directory of your USB drive. Do not change the folder name or browse inside the Firmware folder as doing this may cause firmware corruption. Attempting to navigate or open files within this directory may cause your Operating System to leave behind small temporary system files which can invalidate your firmware.
4. Safely remove the USB drive from your computer.
5. Plug the USB drive into the dLive USB port, and touch Update in the Firmware page. The dLive will reboot to a ‘bootloader’ screen and if valid firmware is found on the USB drive then details of the current versions and versions found on the drive will be displayed.
6. Touch the Update button. Do not interrupt this process. Failure to complete the transfer may result in firmware corruption. Make sure the mains power and connecting cables are reliable and that the system will not be disturbed or switched off during the update.
7. When the firmware has been successfully installed, the system will automatically reboot.
8. Once the system is fully booted, recall a Template Show or User Show to restore your settings.
Télécharger