TRENDnet TW100-BRF104 vB1.xR Router Firmware 3.50(ck2)b5
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: 3.50(ck2)b5.bin.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Upgrade Procedures
1. Save the downloaded firmware file on a network PC that can access the Router’s configuration page. Close all running programs on this PC, disconnect all other PCs from the Router, and power off the DSL/Cable Modem.
2. Unzip the Firmware file, extract the files to the computer’s hard drive and write down the path to the files.
3. From the computer, open Web Browser (i.e. Internet Explorer) and go to the Router’s configuration page (default address is http://192.168.0.1). Enter the user name and password to login the configuration page (default no user name and no password) and click “Cancel” at the “Wizard” Window.
4. Click on “status” on the left, look for “System” and check the “Firmware version”. If the firmware version is 1.1 Release 15 or higher, do not perform the firmware upgrade.
5. From the configuration page, click on “Other” on the left, click on “Upgrade Firmware” type in the Router’s login password (if there is one), click on “Browse” locate and select the firmware file (file path from Step 2 above), click on “Open” click on “Upload” and then click on “Ok” at the warning message.
6. You should see a progress bar on the screen.
<<Warning! DO NOT interrupt the upgrade. DO NOT operate the browser. DO NOT disconnect the network cable. DO NOT power off the Router.>>
7. After the upgrade progress reaches 100%, check the Router front panel LED lights and make sure “Power” is solid green and one of the LAN’s “Link/Act” is solid green and blinks once in a while. Click “Ok” on the screen.
Descargar