TP-Link CPE220 V1 TP_PharOS Firmware 1.3.3_160705
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: TP_PharOS_1.3.3_160705.zip.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Modifications and Bug Correcciones:
1. Fixed compatible issue with Mikrotik AP in Access Point mode.
2. Fixed WPA-PSK connection problem with none-standard SSID in test mode.
How to upgrade TP-LINK Pharos devices:
Notice:
– After you downloaded the firmware from TP-LINK website, please use decompression software such as WinZIP or WinRAR to extract the firmware file to a folder;
– Do NOT upgrade the firmware via wireless connection;
– Do NOT turn off the power or cut down the Ethernet cable during upgrade process;
– It is recommended to backup the current settings so you can restore the settings manually after the upgrade.
– Chrome and Firefox are recommended to upgrade the firmware.
Step 1:
Please verify the product model and the hardware version of your device first and then find the corresponding firmware version on TP-LINK Website. Wrong firmware upgrading may damage your device and void the warranty. Usually you could find the product model and the hardware version from the label on the bottom of the device:.
Note:
if there is no hardware version indicated on the label as seen above, it means it is the first hardware version (V1).
Step 2:
Enter the IP address of the device (Default: http://192.168.0.254) into the address bar of the web browser such as Chrome, Firefox. Log into the TP-LINK Pharos device with your Username and Password.
Step 3:
Navigate to the System tab, at the Firmware Update field, click the Browse button to choose the firmware you already extracted in the folder.
Step 4:
Haga clic en el botón Cargar. A pop-up window will provide you three options:
1. Keep: keep your current configurations after the upgrade
2. Restore: restore to factory default after the upgrade
3. Cancel: cancel the upgrade.
Click Keep or Restore as needed to perform firmware upgrade.
Step 5
: Wait for the upgrade to complete. After the upgrade, the device will reboot automatically.
Step 6:
Log into the devices again, navigate to the Status tab, and check the Firmware Version to see whether the device has been upgraded successfully.
Descargar