Thecus N16910SAS NAS Server Firmware 3.02.02.6
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: Thecus_x86_64_FW.3.02.02.6.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
New Features/Changes:
– Add KVM support from LocalDisplay app V3.02.15.
– Add N2350 N4350 support download SNMP MIB.
– Add N4350 support Migrate RAID1 to RAID5.
– Add support support Kodi app V3.03.05.[KODI_17.4_Krypton].
– Add warning about N2350 N4350 support up to 16TB for each JBOD/RAID volume.
– Improve AFP display.
– Improve APP behavior while NAS shutdown & reboot.
– Improve D16000 & RAID creating.
– Improve eSATA backup.
– Improve fan failure warning.
– Improve File Center behavior.
– Improve help icon with http://esupport.thecus.com.
– Improve iSCSI function.
– Improve multiple language & UI display.
– Improve N2350 N4350 backup function.
– Improve N2350 N4350 compatibility with 100M switch.
– Improve N4820 beep.
– Improve N4820 WOL.
– Improve RAID encryption RAID red warning after decrypt manually.
– Improve RDX behavior.
– Improve remove RAID while iSCSI volume exited.
– Improve System failover.
– Improve user account & ACL.
Online Auto Download & Upgrade:
– If NAS with Internet access capacity, it is no need to download this file, just: CONTROL PANEL -> CONTROL -> FIRMWARE SETTING -> AUTO UPGRADE.
Upgrade firmware:
– Save the downloadable file on your computer.
– Login as admin from web interface to your Thecus NAS with 64bit firmware.
– In the [System Management] menu, choose the [Firmware upgrade] item and the firmware upgrade.
– Press button and select the firmware you downloaded.
– Press [Apply] and the confirm window will pop up. Please select [Next] button twice to confirm the process, and start firmware upgrade. The entire upgrade takes about 3 minutes. After the firmware is upgraded, Thecus NAS will beep for 3 seconds.
– NOTA: If your browser is set to cache the screen, please press CTRL-F5 in your browser to reload from server instead of from browser’s cache.
– During firmware upgrade process, you will see a progress bar indicating the completeness.
– NOTA: During firmware upgrade process, it is imperative that user do not turn off the power to Thecus NAS or close the browser. This will lead to catastrophic result.
– Just in case, the upgrade process failed, please DO NOT restart or shutdown the NAS. Go back and upgrade the firmware again.
– After the firmware is upgraded, you will see a message ask admin user to reboot. Please reboot to finish the upgrade process.
– After click [Reboot], the system will redirect to [Shutdown / Reboot] page, you may select the NAS to shutdown or reboot.
– NOTA: After reboot the Thecus NAS, please go to [System Management > Config Mgmt] to save your configuration. New version of firmware will not work with configuration file from previous versions of firmware.
Descargar