SIGMA fp Camera Firmware 2.01
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: FP__V201.BIN.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Cambios:
– Corrected the phenomenon of displaying white corners on DNGs or CinemaDNGs in some development software when using the following combination; SIGMA fp and Panasonic’s LUMIX S 20-60mm F3.5-5.6 with the Lens Optics Correction function Vignetting setting set to ‘auto’, when the focal length is 20mm and aperture value of F3.5.
– Corrected the bug related to Blackmagic RAW codec recording over HDMI with Blackmagic Video Assist 12G model manufactured by Blackmagic Design.
– Corrected the bug related to Compressed RAW over HDMI recording with Atomos Ninja V monitor-recorder
Caution (Firmware update):
– If the camera is turned off during the update procedure, it might cause a malfunction and damage your camera.
– Please use a dedicated AC adapter or a fully charged battery.
– Do not open the BATTERY/CARD COVER or operate the camera during the firmware update.
– Do not turn off the camera during the firmware update.
How to update the firmware:
– Use SD/SDHC/SDXC card and format the card in the camera body.
– Please connect a card reader containing the SD/SDHC/SDXC card or the camera to your computer and download the firmware file in the SD/SDHC/SDXC card root directory (Please do not store the file in a subfolder such as «DCIM»).
– Insert the SD/SDHC/SDXC card storing the firmware file of .BIN into your camera and turn on the camera.
– Press the MENU button on the back of the camera to display the Camera Set-up Menu.
– Select «Firmware Update» from the Set-up Menu.
– Press the OK button again to display the firmware update window.
– The installed firmware information is displayed.
– «Start Firmware update?» message will be displayed.
– Select «Yes» and then press the OK button to start the firmware update. Firmware update will now start.
– There will be two firmware updates. 5 seconds after starting the first update, the camera body will turn off automatically, and 3 seconds later it will turn on again to start the second update. In case the camera does not restart, turn on the power to resume the update. It takes about 1 minute as a total to update.
– When the message «Firmware update is complete. The camera will be turned off automatically.» is displayed, the update is complete.
– Select the «Information» from the Set-Up menu and confirm the firmware has been updated to successfully.
Descargar