SIGMA fp Camera Firmware 1.02
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: FP__V102.BIN.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Correcciones:
– It has corrected a phenomenon affecting a very small number of individuals whereby DNG files could not be processed during interval timer shooting.
– It has corrected a phenomenon whereby video footage appeared distorted when recorded in MOV format and UHD resolution.
– It has corrected a phenomenon whereby video footage appeared distorted when Distortion Correction and Vignetting Correction operated incorrectly near infinity focus.
– It has corrected a phenomenon whereby a card error occurred when using certain SD cards.
– It has corrected the phenomenon whereby, depending on the Exposure Bracket setting, the camera would shoot bracketed exposures even when the function was set to off.
– It has corrected a phenomenon whereby the brightness of the monitor changed depending on the subject even when the monitor exposure in M mode was set to «on».
– It has corrected a phenomenon whereby the monitor exposure display in M mode was not displayed correctly when using a mount adapter without an electronic contact.
– It has corrected a phenomenon affecting a very small number of individuals whereby the power consumption was greater than usual when the power was turned off.
Caution (Firmware update):
– If the camera is turned off during the update procedure, it might cause a malfunction and damage your camera.
– Please use a dedicated AC adapter or a fully charged battery.
– Do not open the BATTERY/CARD COVER or operate the camera during the firmware update.
– Do not turn off the camera during the firmware update.
How to update the firmware:
– Use SD/SDHC/SDXC card and format the card in the camera body.
– Please connect a card reader containing the SD/SDHC/SDXC card or the camera to your computer and download the firmware file in the SD/SDHC/SDXC card root directory (Please do not store the file in a subfolder such as «DCIM»).
– Insert the SD/SDHC/SDXC card storing the firmware file of .BIN into your camera and turn on the camera.
– Press the MENU button on the back of the camera to display the Camera Set-up Menu.
– Select «Firmware Update» from the Set-up Menu.
– Press the OK button again to display the firmware update window.
– The installed firmware information is displayed.
– «Start Firmware update?» message will be displayed.
– Select «Yes» and then press the OK button to start the firmware update. Firmware update will now start.
– There will be two firmware updates. 5 seconds after starting the first update, the camera body will turn off automatically, and 3 seconds later it will turn on again to start the second update. In case the camera does not restart, turn on the power to resume the update. It takes about 1 minute as a total to update.
– When the message «Firmware update is complete. The camera will be turned off automatically.» is displayed, the update is complete.
– Select the «Information» from the Set-Up menu and confirm the firmware has been updated to successfully.
Descargar