RTW SurroundMonitor 11900 Firmware 04.00.41
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: RTW_11900_update_V040041_01.zip.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Correcciones :
– The independently selectable Trim and Delay values for analog and digital monitoring outputs can now be stored up to five Level/Delay Trim Sets in the Audio System menu. When defining the individual input routing for the sub presets, these sets can be allocated.
– The True Peak Sensitivity option of the Over Indicator menu has been moved to the respective PPM + Loudness Settings menus to make individual settings for each mode and sub preset. If loading older presets, the global value included will be used with every sub preset (Key n menus).
– The delayed reaction of the TP Over display has been corrected.
– The TPmax value of the numerical display in the Status Box now displays dBTP as its unit.
– Potential dysfunctions with partly increasing TPmax values have been removed.
– The numerical display in the Status Box has been improved.
– The synchonization for numeric and bargraph over flag has been improved.
– When selecting British scale in the Peakmeter menus, the headroom set to –9 dBFS will be switched to –10 dBFS automatically.
– In the Sum Group menus the number of digits for the labelling of the M/S/I bargraph is limited to three. When loading older configurations the surplus digits will be cut off.
– Color adjustments for label, loudness scale and numeric font are now correctly used.
– If the Output Signal Timing option in the Alarm Configuration menu is set to “hold”, a reset in the peakmeter view also resets the GPIO events for Digital Over.
– The maximum values of the numerical display will be reset when switching inputs.
– The BLITS generator has been revised, the BLITS analyzer has been adapted and updated.
– The analog Stereo Ident and BLITS outputs are set to 0 dBu independently from the Reference Level Standard setting.
– A new version of the USB mouse driver has been implemented.
– The temperature control has been renewed. With the “minimum” selected for the Fan Control option in the General Settings menu the fans always run on a low level. If “maximum” is selected, the rotation speed is on the highest level. A temperature-sensitive control is available with the “auto” function.
– The detection of the Dolby pcb has been improved.
Descargar