Onset ZW-003 Wireless Sensor Firmware 68
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: FW_68_ZW-003.hex.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Firmware change description:
Firmware release addresses «test mode» issue. Prevents nodes from getting stuck in manufacturing test mode. Modified initialization code that checks the test mode flag in the EEPROM. Clears the flag after deciding to enter test mode. This allows the user to clear the problem by simply power cycling the device.
Obtaining the update:
– Descargue el firmware .hex file for your particular ZW model by right clicking on one of the following links (ctrl-click in OSX) and selecting «Save link as…» – and save the file to the correct location based on your operating system.
– HOBOware, HOBOnode Manager, and ZW Device Communication must be restarted to correctly identify the firmware files. Close HOBOware and HOBOnode Manager if open. If prompted to leave the device communication running in the background, click No. If HOBOware and HOBOnode Manager were already closed, but device communication was running, right-click (or left-click on a Mac) the HOBOware icon in the system tray and select Stop Device Communication.
– Open HOBOware and HOBOnode Manager again. Wait a couple of minutes for new data to be updated in HOBOnode Manager and for the firmware file to be recognized.
– In HOBOnode Manager, double-click the receiver (ZW-RCVR) you want to update in the Device Table (or select the receiver and click Configure).
– Click the «Update device firmware» button in the Configure Receiver window.
– If the «Update device firmware» button is disabled, HOBOnode Manager is still being updated after its restart. Leave the Configure window open and wait a few more minutes until the button is enabled.
– If the «Update device firmware» button does not appear, double-check that the firmware .hex file is in the correct directory as described in Step 1.
– After clicking the «Update device firmware» button, a window appears listing details about the device and any notes about the update process. Note that the update will take about two to three minutes and will require the ZW network to automatically shut down and restart. Click Cancel if you do not want to update the device at this time. Otherwise, click Continue.
– The firmware is updated in the device; check the progress on the screen during the update. When the firmware is saved to the device, the LED on the receiver will flash red. A message appears in the window at the end when the update is successfully complete.
Descargar