Nikon D500 Camera Firmware 1.20 para macOS
Tipo de archivo: Firmware.
Sistema Operativo: Mac.
Nombre del archivo: F-D500-V120M.dmg.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Se corrigieron los siguientes problemas:
– The camera can now connect via Wi-Fi to devices running SnapBridge. For more information, see the “Addendum to the User’s Manual” in which this feature is described. Before using this feature, upgrade to the following version of the app: SnapBridge version 2.5.4 or later
– The camera sometimes had trouble focusing on subjects in the focus points at the edges of the frame.
– The camera would sometimes stop responding during shooting in continuous high-speed (CH) release mode.
– The camera would sometimes not turn off after the power switch was rotated to “OFF”.
Updating from “C” Firmware Versions 1.00 through 1.12 to Version 1.20
– You will need to perform the update twice. Performing the update for a second time completes the firmware update.
– During the first update, the camera may or may not display the message, “Update failed. Contact a Nikon-authorized service representative.” Continue with the second update regardless.
– Performing the Second Update: Complete Steps 5 through 7 of “Updating the Camera Firmware”.
– A Note on the Second Update: Note that the firmware version may or may not change as a result of the first update. If the firmware version has changed, the “Current” and “New” versions displayed in the “Update?” dialog will be the same; otherwise, the two versions will be different. In either case, the firmware version will be updated when you perform the update a second time.
– SnapBridge App Unable to Connect: If the SnapBridge app is unable to connect to the camera after the update, you may not have performed the second update. Select Connect to smart device in the camera SETUP MENU to display the app and camera name; if the Bluetooth icon does not flash in the display, you will need to perform the update again.
Viendo la versión de firmware de la cámara:
– Enciende la cámara.
– Presione el botón MENÚ de la cámara y seleccione Versión de firmware en el MENÚ DE CONFIGURACIÓN para mostrar la versión del firmware de la cámara.
– Verifique la versión del firmware de la cámara.
– Apague la cámara.
Actualización del firmware de la cámara:
– Cree una carpeta en el disco duro de la computadora y asígnele el nombre que desee.
– Guarde el archivo descargable en la carpeta recién creada.
– Run the package to extract a .bin file (the camera firmware) to a folder named “D500Update”
– Con una ranura para tarjeta o un lector de tarjetas, copie el archivo .bin a una tarjeta de memoria que ha sido formateada en la cámara.
– Inserte la tarjeta de memoria en la Ranura 1 de la cámara y encienda la cámara.
– Seleccione la versión de Firmware en el MENÚ DE CONFIGURACIÓN y siga las instrucciones en pantalla para completar la actualización del firmware.
– Una vez que se complete la actualización, apague la cámara y retire la tarjeta de memoria.
– Confirme que el firmware se ha actualizado a la nueva versión.
Descargar