MikroTik RouterOS TILE Firmware 6.47 RC 53
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: all_packages-tile-6.47beta53.zip.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Important note!!!
– The Dude server must be updated to monitor v6.46.4 and v6.47beta30+ RouterOS type devices.
– The Dude client must be manually upgraded after upgrading The Dude server.
– Make sure LTE APN Profile name does not match any of the DHCP server’s names if LTE passthrough is used.
– The Dude requires «winbox» policy instead of «dude» to monitor v6.46.4 and v6.47beta30+ RouterOS type devices.
MAJOR CHANGES IN v6.47:
– dns – added client side support for DNS over HTTPS (DoH) (RFC8484);
– socks – added support for SOCKS5 (RFC 1928);
– user – enable «winbox» policy for groups with «dude» policy;
Cambios en esta versión:
– socks – added support for SOCKS5 (RFC 1928);
– branding – do not ask to confirm configuration applied from branding package;
– certificate – added «skid» and «akid» values for detailed print;
– certificate – allow dynamic CRL removal;
– console – prevent incorrect type interfaces appearing in command hints;
– crs3xx – fixed QSFP interface linking after removing/inserting QSFP module (introduced in v6.47beta49);
– dhcpv4-server – disallow zero lease-time setting;
– filesystem – fixed NAND memory going into read-only mode or becoming unstable over time;
– ike1 – improved policy lookup with specific protocol;
– ike1 – rekey phase 1 rekeying as responder for Windows initiators;
– ipsec – improved system stability when handling fragmented packets;
– kidcontrol – ignore IPv6 multicast MAC addresses;
– lora – added IPv6 support for LoRa packet forwarder;
– lora – added UTC timestamp for RX events in «rxpk» json;
– lte – added support for Huawei K5161 modem;
– lte – fixed IP type selection from APN on RBSXTLTE3-7;
– snmp – fixed multiple LTE interface OID reporting;
– system – improved kernel panic reporting in logs after reboot;
– wireless – added «russia 6ghz» regulatory domain information;
– wireless – added «skip-dfs-channels» parameter;
– wireless – updated «bangladesh» regulatory domain information;
– wireless – updated «russia4» regulatory domain information;
Other changes since v6.46.4:
– bonding – improved slave interface MAC address handling;
– bonding – prefer primary slave MAC address for bonding interface;
– branding – fixed identity setting from branding package;
– branding – properly use HTML files for Hotspot (introduced in v6.47beta);
– bridge – added logging message when a host MAC address is learned on a different bridge port;
– bridge – added warning message when port is dynamically added to entry with VLAN range (CLI only);
– bridge – correctly remove disabled MSTI;
– bridge – improved hardware offloading enabling/disabling;
– capsman – fixed «certificate» parameter updating on CAP;
– certificate – disabled CRL usage by default;
– certificate – do not use SSL for first CRL update;
– chr – added support for file system quiescing;
– crs3xx – correctly remove switch rules on CRS317-1G-16S+ and CRS309-1G-8S+ devices;
– crs3xx – do not change bridge host ID’s when updating host table (introduced in v6.47beta32);
– crs3xx – fixed «ingress-rate» property on CRS309-1G-8S+, CRS312-4C+8XG, CRS326-24S+2Q+ devices;
– crs3xx – fixed QSFP+ interface linking for CRS326-24S+2Q+ device (introduced in v6.47beta19);
– crs3xx – fixed interface statistics for CRS354-48G-4S+2Q+ and CRS354-48P-4S+2Q+ devices;
– crs3xx – fixed traffic forwarding after disabling/enabling bridge hardware offloading for CRS354-48G-4S+2Q+ and CRS354-48P-4S+2Q+ devices;
– crs3xx – improved SFP+ DAC cable initialization for CRS326-24S+2Q+ device;
– crs3xx – improved switch host table updating;
– defconf – fixed «no-defaults=yes» applying default configuration (introduced in v6.47beta);
– defconf – fixed default configuration initialization if power loss occurred during the process;
– dhcpv4 – added end option (255) validation for both server and client;
– dhcpv4-client – improved stability when changing client while still receiving advertisements;
– dhcpv6-client – improved error logging when when renewed address differs;
– dhcpv6-server – fixed MAC address retrieving from DUID when timestamp is present;
– discovery – do not send CDP and LLDP packets on interfaces that does not have MAC address;
– discovery – do not send discovery packets on inactive bonding slave interfaces;
– discovery – do not send discovery packets on interfaces that are blocked by STP;
– disk – improved recently created file survival after reboots;
– dns – added support for exclusive dynamic DNS server usage from IPsec;
– dot1x – added «radius-mac-format» parameter (CLI only);
– dot1x – added hex value support for RADIUS switch rules;
– dot1x – added range «dst-port» support for RADIUS switch rules;
– dot1x – added support for lower case «mac-auth» RADIUS formats;
– dot1x – fixed «reject-vlan-id» value range;
– dot1x – fixed dynamically created switch rule removal when client disconnects;
– dot1x – fixed port blocking when interface changes state from disabled to enabled;
– dot1x – improved debug logging output to «dot1x» topic;
– dot1x – improved value validation for dynamically created switch rules;
– dude – fixed connection to other RouterOS type devices through The Dude agents (introduced in v6.46.4);
– fetch – fixed «User-Agent» usage if provided by «http-header-field»;
– filesystem – fixed NAND memory going into read-only mode or becoming unstable over time;
– health – added «gauges» submenu with SNMP OID reporting;
– hotspot – updated splash page design (‘/ip hotspot reset-html’ required);
– ike1 – added error message when specifying «my-id» for XAuth Identity;
– ike1 – added support for «UNITY_DEF_DOMAIN» and «UNITY_SPLITDNS_NAME» payload attributes;
– ike1 – improved stability when performing policy lookup on non-existant peer;
– ike2 – added support for «INTERNAL_DNS_DOMAIN» payload attribute;
– ipsec – added «split-dns» parameter support for mode configuration (CLI only);
– ipsec – added «use-responder-dns» parameter support (CLI only);
– ipsec – control CRL validation with global «use-crl» setting;
– ipsec – do full certificate validation for identities with explicit certificate;
– ipsec – fixed minor spelling mistake in logs;
– ipsec – improved IPsec service stability when receiving bogus packets;
– lcd – fixed LCD service becoming unavailable on devices without LCD screen;
– led – added «dark-mode» functionality for CRS105-5S-FB;
– led – fixed minor typo in LED warning message;
– lora – added IPv6 support for LoRa packet forwarder;
– lora – added value limits for «freq-off» parameter;
– lora – properly update source address for packets when routing table is changed;
– lte – added support for NEOWAY N720;
– lte – added support for multiple passthrough APN configuration;
– lte – do not allow running «scan» on R11e-4G;
– lte – fixed «allow-roaming» setting when using LTE network mode on R11e-LTE;
– lte – fixed «band» value setting when configuration is reset on R11e-4G;
– lte – fixed multiple APN reactivation after deactivation by operator;
– lte – made «mac-address» parameter read-only;
– lte – show «phy-cellid» value only in LTE mode;
– netinstall – removed «Flashfig» from Netinstall;
– netinstall – removed «Make Floppy» from Netinstall;
– netinstall – signed netinstall.exe with Digital Signature;
– ppp – added support for ZTE MF90;
– ppp – fixed minor typo when running «info» command;
– proxy – increased minimal free RAM that can not be used for proxy services;
– quickset – do not show «SINR» field in Quick Set when there is no data;
– quickset – removed «EARFCN» field from Quick Set;
– quickset – removed «LTE band» setting from Quick Set;
– quickset – show «Antenna Gain» setting on devices without built-in antennas;
– quickset – use «station-wds» mode when connecting to AP with RouterOS flag;
– route – improved system stability after reboot with large amount of VLAN interfaces with PPPoE servers attached;
– routing – improved IGMP-Proxy service stability when receiving bogus packets;
– sniffer – allow setting port for «streaming-server»;
– sniffer – fixed minor typo in «host» menu;
– snmp – added «dot1qTpFdbTable» OID reporting for Q-BRIDGE-MIB;
– snmp – changed «upsEstimatedMinutesRemaining» reported value from seconds to minutes;
– snmp – fixed «dot1dBasePort» index offset for BRIDGE-MIB;
– snmp – improved OID policy checking and error reporting on «set» command;
– snmp – improved stability when polling MAC address related OID;
– ssh – fixed SHA256 user authentication algorithm checking (introduced in v6.46.4);
– supout – added «dot1x» section to supout files;
– supout – added «gps» section to supout files;
– supout – improved PoE-out information reporting;
– supout – improved UPS information reporting;
– switch – made «auto» the default value for «vlan-id» parameter when creating a new static host entry;
– system – correctly handle Generic Receive Offloading (GRO) for MPLS traffic;
– system – improved driver loading speed on startup;
– system – improved system stability when forwarding traffic from switch chip to CPU (introduced in v6.43);
– tr069-client – removed warning log message when not using HTTPS;
– traceroute – improved stability when invalid packet is received;
– traffic-flow – added «postDestinationMacAddress» parameter support for IPFIX and Netflow v9;
– traffic-generator – improved statistics reporting;
– upgrade – fixed space handling in package file names;
– ups – improved compatibility with APC Smart UPS 1000 and 1500;
– w60g – fixed link status logging;
– w60g – improved rate selection in low traffic conditions;
– w60g – improved stability after multiple disconnections;
– w60g – use «arp» and «mtu» parameters from master interface when creating a new station;
– webfig – updated icon design;
– winbox – added «Options» parameter support for DHCPv6 client and server;
– winbox – added «Rate» parameter for switch ACL rules;
– winbox – added «auto-erase» option to «Tool/SMS» menu;
– winbox – added 160Mhz extension channel support for CAPsMAN;
– winbox – added comment support for «Switch->VLAN» menu;
– winbox – added support for «Tools->WoL» menu;
– winbox – added support for inline bar graphs for LTE signal values;
– winbox – aligned all «IP->Traffic Flow->IPFIX» check boxes in single line (WinBox v3.22 required);
– winbox – allow setting «20/40/80/160Mhz-eeeeeeCe» channel under «Channel Width» parameter;
– winbox – allow setting «Primary» parameter for «balance-tlb» bonding interfaces;
– winbox – do not show «Revision» parameter under «System/RouterBOARD» menu on devices that have only one revision;
– winbox – fixed «ARP» parameter inheritance from «CAPs Configuration» configuration;
– winbox – fixed «BGP Origin» value display under «IPv6->Routes» menu;
– winbox – fixed «Bands» parameter display for LTE interfaces;
– winbox – fixed «DSCP» parameter value setting;
– winbox – fixed «Data Rate» checkbox alignment (WinBox v3.22 required);
– winbox – fixed «Frequency» and «Secondary Frequency» parameter inheritance from «CAPs Channel» configuration;
– winbox – fixed «Passthr. MAC Address» parameter display «LTE APNs» menu;
– winbox – fixed «Switch» menu on CRS354-48P-4S+2Q+;
– winbox – fixed «dst-port» unsetting in «IP->Hotspot->Walled Garden» menu;
– winbox – fixed automatic «IPv6->Firewall->Address List» table update;
– winbox – fixed bonding type interface support for «Switch->Host» table;
– winbox – made «none» the default value for «Security Profile» parameter when creating a new «Wirelees->Connect list» entry;
– winbox – made «yes» the default value for «Inject Summary LSAs» parameter when creating a new NSSA or STUB area;
– winbox – properly show «Hw. Offload Group» value for each interface under «Bridge->Ports» menu;
– winbox – removed duplicate «join-eui», «dev-eui», «counter», «chain», «size» and «payload» parameters under «Lora/Traffic»;
– winbox – renamed «Memory used» to «HDD used» for HDD type under «Tools->Graphing->Resource Graphs»;
– winbox – renamed «Routerboard» to «RouterBOARD» under «System/RouterBOARD» menu;
– winbox – show «Hardware Offload» parameter for bonding interfaces;
– winbox – show «System/RouterBOARD/Mode Button» on devices that have such feature;
– winbox – updated icon design;
– wireless – added «U-NII-2» support for hAP ac2 and RBwAPGR series devices;
– wireless – allow using «russia4» regulatory domain on RU locked devices;
– wireless – enabled unicast flood for DHCP traffic on ARM architecture access points;
– wireless – fixed default «antenna-gain» setting on SXT 2 and LtAP series devices;
– wireless – updated «indonesia4» regulatory domain information;
– www – added «tls-version» parameter in «IP->Services» menu (CLI only);
Descargar