MikroTik RouterOS MIPSBE Firmware 6.46 RC 59
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: all_packages-mipsbe-6.46beta59.zip.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
MAJOR CHANGES IN v6.46:
– lora – added support for LoRaWAN low-power wide-area network technology for MIPSBE, MMIPS and ARM;
Cambios en esta versión:
– lora – added support for LoRaWAN low-power wide-area network technology for MIPSBE, MMIPS and ARM;
– backup – fixed automatic backup file generation when configuration reset by button;
– capsman – fixed background scan showing incorrect regulatory domain mismatch error (CAP upgrade required);
– ccr – improved general system stability;
– crs3xx – improved interface initialization;
– dhcpv4-client – fixed «dhcp-options» parameter setting when adding new client;
– dhcpv6-client – properly update bind time when unused prefix received from the server;
– dhcpv6-client – properly update IPv6 address on rebind;
– dhcvp6-client – fixed timeout when doing rebind;
– ethernet – do not enable interface after reboot that is already disabled;
– export – fixed «bootp-support» parameter export;
– ike2 – improved CHILD SA rekey process with Apple iOS 13;
– ipv6 – changed «advertise-dns» default value to «yes»;
– ptp – added support for IEEE 1588 Precision Clock Synchronization Protocol on CRS317-1G-16S+ (CLI only);
– snmp – added «disabled» and «comment» parameters for communities (CLI only);
– snmp – fixed «dot1dBasePort» index offset for BRIDGE-MIB;
– switch – show «external» flag for bridge hosts on MT7621, RTL8367 switch chips;
– wireless – added «canada2» regulatory domain information;
– wireless – allow using «canada2» regulatory domain on US lock devices;
– wireless – fixed sensor MAC address reporting in TZSP header;
– wireless – improved IPQ4019, QCA9984, QCA9888 wireless interface stability;
Other changes since v6.45.6:
– bonding – correctly remove HW offloaded bonding with ARP monitoring;
– bonding – properly handle MAC addresses when bonding WLAN interfaces;
– bridge – disable/enable bridge port when setting bpdu-guard;
– bridge – do not add bridge as untagged VLAN member when frame-types=admit-only-vlan-tagged;
– bridge – include whole VLAN-id in DHCP Option 82 message;
– btest – removed duplicate «duration» parameter;
– capsman – fixed channel auto reselection;
– capsman – fixed frequency setting requiring multiple frequencies;
– capsman – fixed newline character missing on some logging messages;
– capsman – improved DFS channel switching when radar detected;
– certificate – improved CRL updating process;
– chr – added support for Azure guest agent;
– conntrack – properly start manually enabled connection tracking;
– console – added bitwise operator support for «ip6» data type;
– console – fixed «address» column width when printing DHCPv4 leases;
– console – fixed IP conversion to «num» data type;
– console – fixed «tobool» conversion;
– console – properly detect IPv6 address as «ip6» data type;
– crs1xx/2xx – allow to set trunk port as mirroring target;
– crs305 – fixed sfp-sfpplus2 – sfp-sfpplus4 interface linking (introduced in v6.46beta28);
– crs312 – fixed combo SFP port toggling (introduced in v6.44.5);
– crs3xx – correctly display link rate when 10/100/1000BASE-T SFP modules are used in SFP+ interfaces;
– crs3xx – correctly handle L2MTU change;
– crs3xx – do not send pause frames when ethernet «tx-flow-control» is disabled on CRS326/CRS328/CRS305 devices;
– crs3xx – fixed management access when using switch rule «new-vlan-priority» property;
– crs3xx – improved switch-chip resource allocation on CRS317-1G-16S+, CRS309-1G-8S+, CRS312-4C+8XG, CRS326-24S+2Q+ devices;
– crs3xx – improved system stability on CRS309-1G-8S+, CRS312-4C+8XG, CRS326-24S+2Q+ devices;
– crs3xx – remove previously set mirror-source property before changing it;
– defconf – fixed default configuration loading on RBmAPL-2nD (introduced in v6.45);
– defconf – require «policy» permission to print default configuration;
– dhcpv6-server – fixed logged error message when using «address-pool=static-only»;
– dhcpv6-server – include «User-Name» parameter in accounting requests;
– dhcpv6-server – made «calling-station-id» contain MAC address if DUID contains it;
– dot1x – added «reject-vlan-id» server parameter (CLI only);
– dot1x – added support for dynamic switch rules from RADIUS;
– dot1x – added support for «mac-auth» authentication type (CLI only);
– dude – fixed data retrieval over SNMP (introduced in v6.46beta44);
– ethernet – automatically detect interface when using IP address for power-cycle-ping;
– ethernet – send requests only from ethernet interface when using MAC address for power-cycle-ping;
– fetch – fixed «dst-path» not allowed to create new directories (introduced in v6.46beta34);
– fetch – improved stability when processing large output data;
– gps – use «serial1» as default port on RBLtAP-2HnD;
– hotspot – fixed «html-directory» not allowed to create new directories (introduced in v6.46beta34);
– hotspot – fixed non-local NAT redirection to port TCP/64873;
– hotspot – fixed RADIUS CoA «address-list» update;
– ike1 – fixed minor spelling mistake in logs;
– ike2 – fixed IPv6 policy generation (introduced in v6.46beta28);
– ike2 – fixed phase 1 rekeying (introduced in v6.45);
– ipsec – added «error» topic for identity check failure logging messages;
– ipsec – fixed DNS resolving when domain has only AAAA entries;
– led – fixed default LED configuration for RBLHG5nD;
– log – increased log message length limit to 1024 characters;
– lte – added support for LM960A18;
– lte – added support for Telit LM960 and LE910C1 modems;
– lte – do not allow setting 3G and GSM modes on LTE only modems;
– lte – fixed band setting on R11e-4G;
– lte – fixed modem not receiving IP configuration when roaming (introduced in v6.45);
– lte – fixed network registration on R11e-LTE-US;
– lte – fixed Sierra WP7601 driver loading;
– lte – fixed USB network device driver initialization (introduced in v6.46beta9);
– lte – fix «operator» names not being displayed properly;
– lte – improved modem initialization;
– lte – show «primary-band» only for LTE modems;
– lte – use /128 prefix for IPv6 address on LTE interface;
– lte – use interface from RA when «ipv6-interface=none» and IPv6 enabled;
– ppp – added 3GPP IoT «access-technology» definitions;
– ppp – added support for Sierra WP7601;
– ppp – disable DTR send when using at-chat;
– ptp – added support for IEEE 1588 Precision Clock Synchronization Protocol on CRS317-1G-16S+ (CLI only);
– quickset – added «LTE AP Dual» mode support;
– quickset – added «LTE APN» dropdown support;
– quickset – fixed «LTE Band» checkbox display;
– radius – fixed open socket leak when invalid packet is received (introduced in v6.44);
– routerboard – fixed default CPU frequency on RB750r2 («/system routerboard upgrade» required);
– routerboard – fixed USB configuration export on RBLtAP-2HnD;
– routerboard – hide «memory-frequency» parameter for RBLtAP-2HnD;
– sfp – correctly read EEPROM data from SFP modules (introduced in v6.46beta38);
– sfp – fixed «sfp-rx-power» value for some transceivers;
– sniffer – allow filtering by packet size;
– snmp – fixed «radio-name» (mtxrWlRtabRadioName) OID support;
– snmp – improved LLDP interface returned index and type;
– snmp – return only interfaces with MAC addresses for LLDP;
– snmp – use «src-address» also for traps;
– supout – removed «file» option from «/system sup-output» command;
– switch – correctly update dynamic switch rule when dhcp-snooping is enabled;
– system – fixed branding package installation (introduced in v6.46beta34);
– system – improved system stability for devices with AR9342;
– tr069-client – added CellDiagnostics parameter support;
– tr069-client – added LTE band and cellular technology selection parameters;
– tr069-client – added LTE RSCP, ECNO and ICCID parameter support;
– tr069-client – added multiple LTE monitoring parameters;
– tr069-client – fixed firmware update (introduced in v6.46beta34);
– tr069-client – reconnect to ACS when «ConnectionRequestURL» is updated;
– upgrade – improved auto package updating using «check-for-updates»;
– usb – general USB modem stability improvements;
– userman – fixed customer referencing on WEB (introduced in v6.46beta9);
– userman – updated Authorize.Net to use SHA512 hashing;
– w60g – added «region» setting to limit allowed frequencies (CLI only);
– webfig – fixed link to Winbox download;
– winbox – added «ip-address» and stats columns in «IP/Kid-Control/Devices» menu;
– winbox – added «public-address-ipv6» parameter to «IP/Cloud» menu;
– winbox – added «reset-counters» button to «IP/Kid Control/Devices» menu;
– winbox – added «tx-info-field» parameter to «Wireless/W60G» menu;
– winbox – added «Vendor Classes» tab in «IP/DHCP Server» menu;
– winbox – added wireless alignment LED types to «System/LEDs» menu;
– winbox – fixed allowed range for bridge filter «new-priority» parameter;
– winbox – fixed «cluster-id» parameter setting in «Routing/BGP/Instances» menu;
– winbox – fixed file locking when uploading multiple files at once;
– winbox – fixed firewall limit parameter support for rates more than 4G;
– winbox – fixed invalid flag presence in «IP/SMB/Shares» menu;
– winbox – fixed «Routing» menu icon presence when there is no routing package installed;
– winbox – improved stability when transfering multiple files between multiple windows;
– winbox – properly show timestamp in file «Creation Time» field;
– winbox – removed «Set CA Passphrase» button from «Certificate» menu;
– winbox – renamed «Queue Limit» to «Queue Size» for «pcq-upload-default» and «pcq-download-default» parameters;
– winbox – replaced «kb» with «KiB» in «Tools/Packet Sniffer» menu;
– winbox – show «Switch» menu on RBwAPGR-5HacD2HnD;
– winbox – show «System/RouterBOARD/Mode Button» on devices that have such feature;
– wireless – added 4 chain MCS support for 802.11n wireless protocol (CLI only);
– wireless – fixed 802.11n rate selection when managed by CAPsMAN;
– wireless – fixed RX chain selection;
– wireless – improved 802.11ac stability for all ARM devices with wireless;
– wireless – improved stability when setting fixed primary and secondary channels on RB4011iGS+5HacQ2HnD-IN;
– wireless – updated «ukraine» regulatory domain information;
– wireless – updated «united-states» regulatory domain information;
Descargar