MikroTik RouterOS ARM64 Firmware 6.48 RC 12
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: all_packages-arm64-6.48beta12.zip.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
What’s new in 6.48beta12:
– arm – added support for automatic CPU frequency stepping for IPQ4018/IPQ4019 devices;
– arm – improved watchdog and kernel panic reporting in log after reboots on IPQ4018/IPQ4019 devices;
– bonding – added LACP monitoring (CLI only);
– bridge – added warning message when port is disabled by the BPDU guard;
– bridge – correctly remove dynamic VLAN assignment for bridge ports;
– bridge – fixed dynamic VLAN assignment when changing port «frame-type» property (introduced in v6.46);
– bridge – fixed dynamic VLAN assignment when changing port to tagged VLAN member;
– bridge – fixed local MAC address removal from host table when deleting bridge interface;
– bridge – improved BPDU guard logging;
– chr – improved interface loading on startup on XEN;
– chr – improved system stability when changing flow control settings on e1000;
– crs3xx – added initial Bridge Port Extender support (CLI only);
– crs3xx – added initial Controlling Bridge support for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices (CLI only);
– crs3xx – fixed duplicate host entries when creating static switch hosts;
– crs3xx – fixed HW offloading for netPower 15FR and netPower 16P devices (introduced in v6.47);
– crs3xx – fixed increased CPU temperature for CRS354-48G-4S+2Q+ device (introduced in v6.47);
– crs3xx – improved Ethernet port group traffic forwarding for CRS354 devices;
– defconf – fixed default configuration loading on RBmAPL-2nD;
– defconf – improved default configuration generation on devices with changed wireless interface names;
– dhcpv6-server – added ability to generate binding on first request;
– dhcpv6-server – disallow changing binding’s «prefix-pool»;
– dhcpv6-server – improved stability when changing server for static bindings;
– dns – do not allow setting «forward-to» same as «name» or «regex»;
– dns – do not allow setting zero value IP addresses for «A» and «AAAA» records;
– dns – do not use DoH for local queries when a server is specified;
– dns – do not use type «A» for static entries with unspecified type;
– dns – fixed listening for DNS queries when only dynamic static entries exist (introduced in v6.47);
– export – fixed HotSpot «address-per-mac» parameter export;
– export – fixed RouterBOARD USB «type» parameter export;
– fetch – show status «uploaded» instead of «downloaded» when uploading a file;
– filesystem – fixed increased «sector writes» reporting (introduced in v6.47);
– filesystem – improved long-term filesystem stability and data integrity;
– ftp – fixed possible buffer overflow;
– ike1 – allow using «my-id» parameter with XAuth;
– ike1 – fixed policy update with and without mode configuration;
– ike1 – rekey phase 1 as responder for Windows initiators;
– ike2 – added «prf-algorithm» support for phase 1;
– ike2 – fixed initiator child SA init without policy;
– ike2 – fixed policy reference for pending acquire;
– ike2 – improved child SA rekeying process;
– ike2 – retry RSA signature validation with deduced digest from certificate;
– ipsec – added SHA384 hash algorithm support for phase 1 (CLI only);
– ipsec – do not update peer endpoints for generated policy entries (introduced in v6.47);
– ipsec – fixed multiple warning message display for peers;
– ipsec – inactivate peer’s policy on disconnect;
– kidcontrol – allow creating static device entries without assigned user;
– lora – added «spoof-gps» parameter for fake GPS coordinate sending;
– lora – fixed JSON statistics inaccuracies;
– lte – added «age» column and «max-age» parameter to «cell-monitor» (CLI only);
– lte – added «comment» parameter for APN profiles (CLI only);
– lte – added support for MTS 8810FT;
– lte – fixed modem initialization when multiple modems are used simultaneously;
– lte – fixed PDP authentication configuration for SIM7600;
– metarouter – fixed image importing (introduced in v6.46);
– ospf – improved route tag processing for OSPFv3;
– ppp – added «ipv6-routes» parameter to «secrets» menu;
– ppp – added support for «Framed-IPv6-Route» RADIUS attribute;
– ppp – allow specifying pool name for «remote-ipv6-prefix-pool» parameter;
– profile – fixed «unclassified» load reporting on PowerPC devices (introduced in v6.47);
– qsfp – fixed auto-negotiation status;
– qsfp – fixed break-out cable linking after reboot (introduced in v6.47);
– qsfp – ignore FEC mode when set to fec91, only fec74 mode is supported (introduced in v6.47);
– route – improved stability when 6to4 interface is configured with disabled IPv6 package;
– routerboard – fixed «mode-button» support on SMIPS devices (introduced in v6.47);
– routerboard – fixed «reset-button» menu presence on all devices;
– smb – fixed possible memory leak;
– smb – fixed SMB server (introduced in v6.47);
– smb – limit active session count to 5 per connection;
– ssh – fixed returned output saving to file when «output-to-file» parameter is used;
– supout – added «LoRa» section to supout file;
– switch – fixed MAC address learning on switch-cpu port for Atheros8316, Atheros8227 and Atheros7240 switch chips;
– system – replace «3» in superscript to «^3» on RBD53GR devices;
– tr069-client – added LTE model and revision parameters;
– tr069-client – added «X_MIKROTIK_MimoRSRP» parameter for LTE RSRP value reporting;
– tr069-client – allow passing LTE firmware update URL as XML;
– w60g – added «mdmg-fix» parameter for RBwAP60Gx3 (CLI only);
– winbox – allow performing «USB Power Reset» on «0» bus on RBM33G;
– winbox – fixed flag displaying under «IP/DNS/Static» table;
– winbox – fixed «IP->Kid Control->Devices» table automatic refreshing;
– winbox – fixed minor typo in «BGP/Peer» menu;
– winbox – fixed minor typo in «Users» menu;
– winbox – fixed «receive-errors» setting persistence under «Wireless/Wireless Sniffer/Settings» menu;
– winbox – fixed «tls-version» parameter setting under «IP/Services» menu;
– winbox – hide irrelevant switch port parameters;
– winbox – use health values reported by gauges for «System/Health» menu;
– wireless – changed «station-roaming» default setting from «enabled» to «disabled»;
– wireless – create «connect-list» rule when address specified for «setup-repeater»;
– wireless – updated «bangladesh» regulatory domain information;
– wireless – updated «egypt» regulatory domain information;
Descargar