MikroTik RouterOS ARM Firmware 6.47
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: all_packages-arm-6.47.zip.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Important note!!!
– The Dude server must be updated to monitor v6.46.4 and v6.47beta30+ RouterOS type devices.
– The Dude client must be manually upgraded after upgrading The Dude server.
– The Dude requires «winbox» policy instead of «dude» to monitor v6.46.4 and v6.47beta30+ RouterOS type devices.
– Make sure LTE APN Profile name does not match any of the DHCP server’s names if LTE passthrough is used.
MAJOR CHANGES IN v6.47:
– dns – added client side support for DNS over HTTPS (DoH) (RFC8484);
– socks – added support for SOCKS5 (RFC 1928);
– user – enable «winbox» policy for groups with «dude» policy automatically on upgrade;
Cambios en esta versión:
– api – added ECDHE cipher support for «api-ssl» service;
– bonding – improved slave interface MAC address handling;
– bonding – prefer primary slave MAC address for bonding interface;
– branding – do not ask to confirm configuration applied from branding package;
– branding – fixed identity setting from branding package;
– branding – improved branding package installation process when another branding package is already installed;
– bridge – added logging debug message when a host MAC address is learned on a different bridge port;
– bridge – added warning message when a bridge port gets dynamically added to VLAN range;
– bridge – correctly remove disabled MSTI;
– bridge – improved hardware offloading enabling/disabling;
– certificate – added «skid» and «akid» values for detailed print;
– certificate – allow dynamic CRL removal;
– certificate – disabled CRL usage by default;
– certificate – do not use SSL for first CRL update;
– chr – added support for file system quiescing;
– chr – added support for hardware watchdog on ESXI;
– chr – enabled support for VMBus protocol version 4.1;
– chr – improved system stability when running CHR on Hyper-V;
– crs3xx – correctly remove switch rules on CRS317-1G-16S+ and CRS309-1G-8S+ devices;
– crs3xx – fixed «ingress-rate» property on CRS309-1G-8S+, CRS312-4C+8XG, CRS326-24S+2Q+ devices;
– crs3xx – fixed hardware offloaded bonding on Ethernet interfaces for CRS354 devices;
– crs3xx – improved 10G interface initialization on CRS312 devices;
– crs3xx – improved switch host table updating;
– crs3xx – show correct switch model for netPower 15FR device;
– defconf – fixed default configuration initialization if power loss occurred during the process;
– dhcpv4 – added end option (255) validation for both server and client;
– dhcpv4-client – improved stability when changing client while still receiving advertisements;
– dhcpv4-server – disallow zero lease-time setting;
– dhcpv6-client – improved error logging when when renewed address differs;
– dhcpv6-server – do not require «server» parameter for bindings;
– dhcpv6-server – fixed MAC address retrieving from DUID when timestamp is present;
– discovery – do not send discovery packets on inactive bonding slave interfaces;
– discovery – do not send discovery packets on interfaces that are blocked by STP;
– disk – improved disk management service stability when receiving bogus packets;
– disk – improved recently created file survival after reboots;
– dns – added support for exclusive dynamic DNS server usage from IPsec;
– dns – added support for forwarding DNS queries of static entries to specific server;
– dns – added support for multiple type static entries;
– dot1x – added «radius-mac-format» parameter;
– dot1x – added hex value support for RADIUS switch rules;
– dot1x – added range «dst-port» support for RADIUS switch rules;
– dot1x – added support for lower case «mac-auth» RADIUS formats;
– dot1x – fixed «reject-vlan-id» value range;
– dot1x – fixed dynamically created switch rule removal when client disconnects;
– dot1x – fixed port blocking when interface changes state from disabled to enabled;
– dot1x – improved Dot1X service stability when receiving bogus packets;
– dot1x – improved debug logging output to «dot1x» topic;
– dot1x – improved value validation for dynamically created switch rules;
– email – added support for multiple «to» recipients;
– ethernet – fixed interface stopping responding after blink command execution on CCR2004-1G-12S+2XS;
– fetch – fixed «User-Agent» usage if provided by «http-header-field»;
– graphing – improved graphing service stability when receiving bogus packets;
– health – added «gauges» submenu with SNMP OID reporting;
– health – improved stability for system health monitor on CCR2004-1G-12S+2XS;
– hotspot – updated splash page design (‘/ip hotspot reset-html’ required);
– ike1 – added error message when specifying «my-id» for XAuth identity;
– ike1 – added support for «UNITY_DEF_DOMAIN» and «UNITY_SPLITDNS_NAME» payload attributes;
– ike1 – do not try to keep phase 2 when purging phase 1;
– ike1 – improved policy lookup with specific protocol;
– ike1 – improved stability when performing policy lookup on non-existant peer;
– ike2 – added support for «INTERNAL_DNS_DOMAIN» payload attribute;
– ike2 – added support for RADIUS Disconnect-Request message handling;
– ike2 – added support for RFC8598;
– ike2 – allow initiator address change before authentication;
– ike2 – fixed authentication handling when initiator disconnects before RADIUS response;
– interface – improved system stability when receiving bogus packets;
– interface – increased loopback interface MTU to 65536;
– ipsec – added «split-dns» parameter support for mode configuration;
– ipsec – added «use-responder-dns» parameter support;
– ipsec – allow specifying two peers for a single policy for failover;
– ipsec – control CRL validation with global «use-crl» setting;
– ipsec – do full certificate validation for identities with explicit certificate;
– ipsec – fixed minor spelling mistake in logs;
– ipsec – improved IPsec service stability when receiving bogus packets;
– ipsec – place dynamically created IPsec policies by L2TP client at the begining of the table;
– kidcontrol – ignore IPv6 multicast MAC addresses;
– l2tp – added «src-address» parameter for L2TP client;
– l2tp – added «use-peer-dns» parameter for L2TP client;
– l2tp – improved dynamically created IPsec configuration updating;
– l2tp – use L2TP interface when adding dynamic IPsec peer;
– lcd – fixed LCD service becoming unavailable on devices without LCD screen;
– lcd – improved general system stability when LCD is not present;
– led – fixed minor typo in LED warning message;
– log – added logging entry when changing user’s password;
– log – added tunnel endpoint address to establishment and disconnect logging entries;
– log – made startup script failures log as critical errors;
– lte – added support for Huawei K5161 modem;
– lte – added support for NEOWAY N720;
– lte – added support for multiple passthrough APN configuration;
– lte – do not allow running «scan» on R11e-4G;
– lte – fixed «allow-roaming» setting when using LTE network mode on R11e-LTE;
– lte – fixed «band» parameter persistence after disable/enable;
– lte – fixed «ecno» and «rscp» value reporting on R11e-LTE6;
– lte – fixed VLAN interface passthrough support;
– lte – fixed multiple APN reactivation after deactivation by operator;
– lte – improved stability during firmware upgrade;
– lte – made «mac-address» parameter read-only;
– lte – show «phy-cellid» value only in LTE mode;
– netinstall – removed «Flashfig» from Netinstall;
– netinstall – removed «Make Floppy» from Netinstall;
– netinstall – signed netinstall.exe with Digital Signature;
– netwatch – improved Netwatch service stability when invalid configuration values are passed;
– ovpn – added «use-peer-dns» parameter for OVPN client;
– port – removed serial console port on hEX S;
– ppp – added «Acct-Session-Id» attribute to «Access-Request» messages;
– ppp – added support for ZTE MF90;
– ppp – fixed minor typo when running «info» command;
– ppp – removed «comment», «set» and «edit» commands from «PPP->Active» menu;
– pptp – added «use-peer-dns» parameter for PPTP client;
– profile – added support for CCR2004-1G-12S+2XS;
– proxy – increased minimal free RAM that can not be used for proxy services;
– qsfp – added support for FEC mode (fec74), with the FEC mode disabled by default;
– quickset – do not show «SINR» field in Quick Set when there is no data;
– quickset – fixed invalid configuration applying when performing changes during LTE modem initialization process;
– quickset – removed «EARFCN» field from Quick Set;
– quickset – removed «LTE band» setting from Quick Set;
– quickset – show «Antenna Gain» setting on devices without built-in antennas;
– quickset – use «station-wds» mode when connecting to AP with RouterOS flag;
– route – improved system stability after reboot with large amount of VLAN interfaces with PPPoE servers attached;
– routerboard – added «hold-time» parameter to mode-button menu;
– routerboard – added «reset-button» menu – custom command execution with reset button;
– routing – improved IGMP-Proxy service stability when receiving bogus packets;
– routing – improved routing service stability when receiving bogus packets;
– sfp28 – added support for FEC modes (fec74 and fec91), with fec91 mode already enabled by default;
– sniffer – allow setting port for «streaming-server»;
– snmp – added «dot1qTpFdbTable» OID reporting for Q-BRIDGE-MIB;
– snmp – changed «upsEstimatedMinutesRemaining» reported value from seconds to minutes;
– snmp – fixed «dot1dBasePort» index offset for BRIDGE-MIB;
– snmp – improved OID policy checking and error reporting on «set» command;
– snmp – improved stability when polling MAC address related OID;
– ssh – improved SSH service stability when receiving bogus packets;
– supout – added «dot1x» section to supout files;
– supout – improved UPS information reporting;
– switch – correctly display switch statistics when all switch ports are disabled on RTL8367 switch chip;
– switch – correctly enable and disable CPU Flow Control on RB3011UiAS;
– switch – made «auto» the default value for «vlan-id» parameter when creating a new static host entry;
– system – correctly handle Generic Receive Offloading (GRO) for MPLS traffic;
– system – improved driver loading speed on startup;
– tr069-client – added LTE firmware update functionality support;
– tr069-client – added additional LTE information parameters;
– tr069-client – added additional wireless registration table parameters;
– tr069-client – added interface type parameter support;
– tr069-client – added multiple simultaneous session support for diagnostics test;
– tr069-client – added total connection tracking entries parameter;
– tr069-client – removed warning log message when not using HTTPS;
– traffic-flow – added «postDestinationMacAddress» parameter support for IPFIX and NetFlow v9;
– upgrade – fixed space handling in package file names;
– ups – added battery info for APC SmartUPS 2200;
– ups – improved compatibility with APC Smart UPS 1000 and 1500;
– user – improved user management service stability when receiving bogus packets;
– w60g – fixed link status logging;
– w60g – improved rate selection in low traffic conditions;
– w60g – use «arp» and «mtu» parameters from master interface when creating a new station;
– webfig – fixed 5 GHz wireless interface «frequency» parameter value list on Audience;
– webfig – fixed WinBox download link;
– webfig – fixed skin usage from branding package;
– webfig – updated icon design;
– winbox – added «Rate» parameter for switch ACL rules;
– winbox – added «auth-info» parameter under «Dot1X->Active» menu;
– winbox – added «auth-types», «comment», «mac-auth-mode» and «reject-vlan-id» parameters for Dot1X server;
– winbox – added «auto-erase» option to «Tool/SMS» menu;
– winbox – added «bus» parameter for «USB Power Reset» command on NetMetal ac^2;
– winbox – added «bus» parameter for «USB Power Reset» command on RBM33G;
– winbox – added «comment» parameter and «dynamic» flag support under «Switch->Rule» table;
– winbox – added «comment» parameter for Dot1X client;
– winbox – added «region» parameter for W60G interfaces;
– winbox – added «skip-dfs-channels» parameter to wireless interface menu;
– winbox – added comment support for «Switch->VLAN» menu;
– winbox – added enable and disable buttons for «MPLS->MPLS Interface» table;
– winbox – added support for inline bar graphs for LTE signal values;
– winbox – aligned all «IP->Traffic Flow->IPFIX» check boxes in single line (WinBox v3.22 required);
– winbox – allow setting «Primary» parameter for «balance-tlb» bonding interfaces;
– winbox – allow to specify any Ethernet like interface under «Tool/WoL» menu;
– winbox – do not allow to enter empty strings in «caps-man-names» and «common-name» parameters;
– winbox – fixed «BGP Origin» value display under «IPv6->Routes» menu;
– winbox – fixed «Data Rate» checkbox alignment (WinBox v3.22 required);
– winbox – fixed «Tx/Rx Signal Strength» value presence for 4 chain interfaces;
– winbox – fixed WDS usage when connecting to RouterOS access point using QuickSet;
– winbox – fixed bonding type interface support for «Switch->Host» table;
– winbox – fixed dates and times in interface link up/down properties (WinBox v3.24 required);
– winbox – fixed wireless interface «HT» tab setting presence when «band=5ghz-n/ac»;
– winbox – fixed wireless sniffer parameter setting;
– winbox – limit number of simultaneous WinBox sessions to 5 for users without «write» permission;
– winbox – made «yes» the default value for «Inject Summary LSAs» parameter when creating a new NSSA or STUB area;
– winbox – removed duplicate «join-eui», «dev-eui», «counter», «chain», «size» and «payload» parameters under «LoRa/Traffic»;
– winbox – renamed «Routerboard» to «RouterBOARD» under «System/RouterBOARD» menu;
– winbox – show «Hardware Offload» parameter for bonding interfaces;
– winbox – updated icon design;
– wireless – added «russia 6ghz» regulatory domain information;
– wireless – enabled unicast flood for DHCP traffic on ARM architecture access points;
– wireless – fixed Nstreme wireless protocol performance decrease;
– wireless – improved management service stability when receiving bogus packets;
– wireless – updated «egypt» regulatory domain information;
– wireless – updated «russia4» regulatory domain information;
– www – added «tls-version» parameter in «IP->Services» menu;
Descargar