Magnavox 55MV314X Smart TV Firmware 047.1
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: FNI-0CFX_047_1.zip.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Upgrading the software
USB upgrade
You can upgrade the software by using USB Memory Stick.
1 Connect your USB Memory Stick with the upgrade file to the USB terminal on the side of your TV.
2 Use up/down to select Software update, then press OK.
3 Use up/down to select USB, then press OK.
4 Use up/down to select the desired Update file.
5 Use left/right to select Yes, then press OK.
6 Read the on-screen instructions and confirm that you want to continue with the installation.
7 When the software upgrade is completed, press B to set the unit into Standby mode, then remove the USB Memory Stick.
8 Unplug the AC power cord for 5 seconds from the AC outlet and plug it again.
9 Press B again to Turn the unit On.
The TV starts up with the new software.
Network updates
You can update the software by connecting the unit to the Internet.
1 Use up/down to select Software update, then press OK.
2 Use up/down to select Network, then press OK.
3 Use left/right to select Yes, then press OK.
This unit will then start checking for the latest FirmWare (software) version.
4 Confirmation message will appear. Use left/right to select Yes, then press OK.
The unit will start downloading the latest FirmWare (software) version.
The unit will start updating the FirmWare (software) version.
It may take a while to complete the updating.
5 When the software update is complete, press B to make sure the unit goes to Standby mode.
6 Unplug the AC power cord for 5 seconds from the AC outlet and plug it again.
7 Press B again to Turn the unit On.
The TV starts up with the new software.
Descargar